š Overview
Notifications only help when they're the right ones. Too many, and the approval you've been waiting for gets buried under task updates. Too few, and you find out a vendor declined a subcontract days after it happened.
Notification Settings is where you decide, event by event, how Structur tells you about activity. It's a page in the Settings pop-up. Events are grouped into sections such as Proposals, Tasks and Change Orders, and each event has its own Web, Email and Push toggle. A change saves the moment you flip it.
One part of this page does more than it looks. On rows like Proposal sent to client or Change Order to Client sent to client, your Email toggle also decides whether your client or vendor gets the email. Read the warning in step 3 before you turn any of those off.
š Understanding Notification Settings
ā” What It Does
Settings > Notifications allows you to:
Choose how you hear about each event -- in your Notifications feed (Web) or in your inbox (Email). The Push column is marked Coming Soon on the web
Tune every event separately -- each event has its own row, so you can keep the ones that matter and turn off the rest
Save without a Save button -- every toggle saves as soon as you click it
Keep your own choices -- your settings are for your user, so each teammate sets their own
Control some client and vendor emails -- on rows such as Proposal sent to client or Invoice sent to client, your Email toggle also decides whether the email to your client or vendor goes out
š When to Use It
Notification Settings is most valuable when you want to:
Cut down email about your team's routine activity
Make sure you hear about client and vendor responses right away
Check why a client or vendor didn't get a document you sent
Set up your notifications to fit your role when you start using Structur
š Step-by-Step Instructions
1. Open Notification Settings
Click Notifications in the left sidebar, then click Notification Preferences
Note: You can also click Settings in the left sidebar and then Notifications, right below Permissions. Both routes open the same page.
2. Turn Events On or Off
The page starts with the General card, followed by one card per section. Each card has its own WEB, EMAIL and PUSH column headers.
Find the section, for example Tasks
Find the event, for example Task assigned
Click the Web or Email toggle to turn it on or off
The change saves straight away. There's no Save button and no confirmation message.
Until you change a row, it shows that event's default setting. Rows that email your client or vendor start with Email on.
Note: Each event is set on its own row. There's no switch to turn off a whole section, and no search, so scroll to the section you need.
3. Before You Turn Off a "Sent" Email
Some rows are about emails that go to someone outside your company, such as your client or a vendor. These rows say so under the event name: "Turning Email off also stops the email to the client." (or "to the vendor.").
Your own Email toggle on these rows also decides whether the email goes to your client or vendor: Ballpark sent to client, Proposal sent to client, Proposal declined manually by company, Proposal voided by company, Change Order to Client sent to client (and its declined manually and voided by company rows), Change Order to Subcontract sent to vendor, Selection document sent to client, Submittal sent to vendor, Invoice sent to client, Invoice payment received, Invoice paid, Invoice voided, Bill paid and Subcontract paid by company.
When you send a proposal, invoice or change order, the send window has an Email the client switch that starts from this toggle. With your toggle off, the switch starts off and the window names the Settings row, so you can turn the switch on to email the client for that send only. See Send a Proposal.
Important: On these rows, a send with your Email toggle off is still recorded (a ballpark or selection still shows as sent), but no email goes out. The ballpark, selection and submittal send windows tell you when your toggle means no email will go out. Keep Email on for these rows. If one is off, turn it back on, then send the document again.
Subcontract Lien Waiver submitted to vendor works differently. With Email off, the send is refused with the message "Your notification preferences have "Subcontract Lien Waiver submitted to vendor" email turned off. Turn it on to send this lien waiver." Turn it on and send again.
On Subcontract sent to vendor, Bid package sent to vendor, RFI sent to client/vendor and Daily Log sent to client, your toggle only changes your own notifications. The client or vendor still gets their email. (Currently, an RFI doesn't email your client at all, even with Include Client on. See RFIs.)
Note: Your toggles only affect documents you send. If a teammate sends documents too, they need to check their own Notification Settings.
Note: Currently, sending a proposal doesn't add a notification to your feed, even with Web on for Proposal sent to client. To confirm a proposal went out, check its envelope on the Proposals list.
4. Understand Push
The PUSH column is for the Structur mobile app. Currently, every Push toggle on the web is greyed out, and hovering the PUSH header shows Coming Soon with a MOBILE APP badge. The exceptions are two rows under Community: Replies, mentions and direct messages and Daily summary of the Systems Accelerator community, where Push can be changed.
Note: Some Community rows only use some channels. Replies, mentions and direct messages has no Email toggle (missed activity is covered by the daily summary), and Daily summary email of the Structur Community is email only.
š Notification Events
These are the events on the page, grouped by section in the order they appear.
General: User joined to the company
Messages: New messages
Leads: New lead from embed form
Bids: Bid package sent to vendor, Bid submitted by vendor, Bid declined by vendor, Bid submission awarded by company
Ballparks: Ballpark sent to client
Proposals: Proposal sent to client, Proposal approved manually by company, Proposal declined manually by company, Proposal voided by company, Proposal approved by client, Proposal declined by client, Proposal edits requested by client
Tasks: Task assigned, Task marked as complete, Task overdue, Task reminder, Mentioned in a task comment, New comment on a task you are assigned to or follow, Daily task digest, Message from a board automation
Checklists: New checklist created for the project, Checklist completed in the project
Daily Logs: Daily Log sent to client
Schedule: Schedule item assigned, Schedule item completed, Schedule item altered
Timesheet: Timesheet entry created, Timesheet reminder
Submittals: Submittal sent to vendor, Submittal replied, Submittal approved, Submittal rejected, Submittal revised, Submittal marked as complete
RFIs: RFI sent to client/vendor, RFI answered, RFI marked as closed
Subcontracts: Subcontract sent to vendor, Subcontract approved manually by company, Subcontract declined manually by company, Subcontract approved by vendor, Subcontract declined by vendor, Subcontract edits requested by vendor, Subcontract paid by company, Subcontract Lien Waiver submitted to vendor, Subcontract Lien Waiver signed, Subcontract payment requested
Selections: Selection document sent to client, Selection document signed by client
Change Orders: Change Order to Client sent to client, approved manually by company, declined manually by company, voided by company, approved by client, declined by client, edits requested by client; Change Order to Subcontract sent to vendor, approved manually by company, declined manually by company, voided by company, approved by vendor, declined by vendor, edits requested by vendor
Bills: Bill created, Bill paid, Bill voided
Expenses: Expense paid, Expense voided
Receipts: Receipt created, Receipt converted
Invoices: Invoice sent to client, Invoice payment received, Invoice paid, Invoice voided
Standard Operating Procedures: Quiz assigned to user, Quiz answered, Checklist submission, Form entries, Scorecard entries
Community: Replies, mentions and direct messages, Daily summary email of the Structur Community, Daily summary of the Systems Accelerator community, New comment on community post
ā Best Practices
Leave Email on for the rows that email your client or vendor -- turning one off stops that email. The proposal, invoice, change order, ballpark, selection and submittal send windows warn you.
Cut email on your team's own activity instead -- rows like Task marked as complete, Timesheet entry created or Receipt created are about your team's own work. Leave rows about payments and voids (for example Bill paid or Invoice paid) on, because some of those also email your client or vendor.
Keep client and vendor responses on -- rows like Proposal approved by client or Subcontract declined by vendor are the ones you'll want to hear about fast.
Check your settings when a client says they got nothing -- a "sent" row that's off is one of the first things to look at.
Ask every teammate who sends documents to check their own page -- settings belong to each user, so one person's fix doesn't cover the team.
Use Web for anything you just want on record -- it keeps the event in your feed without filling your inbox.
ā Common Questions
Q: Do I need to click Save?
A: No. Each toggle saves as soon as you click it, and stays that way after you reload the page.
Q: My client didn't get the proposal I sent. Could my settings be the reason?
A: It can be. Open Settings > Notifications and check Email on Proposal sent to client. If it's off, the Email the client switch in the send window starts off, and a proposal sent that way is only marked as sent. The message after sending says "No email was sent to the client." Turn the toggle on, or turn the switch on when you send, and send the proposal again. See Client Email Not Received for the full checklist.
Q: How do I get fewer emails without stopping my client emails?
A: Leave Email on for the "sent to client" and "sent to vendor" rows. Turn off Email on rows about your team's own activity, such as Task marked as complete or Receipt created, and keep Web on so they still show in your feed.
Q: Why can't I turn Push on or off?
A: Currently, Push settings can't be changed on the web. The PUSH column shows Coming Soon. The only Push toggles you can change are Replies, mentions and direct messages and Daily summary of the Systems Accelerator community, under Community.
Q: Can an admin set notifications for the whole company?
A: No. Each user sets their own, and nobody, admins included, can see or change another user's settings. If you want your team to follow the same setup, share which rows to change and ask each person to update their own Notification Settings.
Q: Is there a way to turn off a whole section at once?
A: Currently, no. Each event has its own toggles, so turn them off row by row.
Q: Is this the same as the notification switches in the Client Portal?
A: No. This page is for you and your team. Your client has their own Notification settings inside the Client Portal, which control some of the emails they get. See Client Portal.
ā ļø Common Mistakes to Avoid
ā Don't | ā Do |
Turn off Email on "sent to client" rows to quiet your inbox | Turn off Email on rows about your team's own activity |
Assume a document reached your client because it shows as sent | Check its email status after sending, such as the envelope on the Proposals list |
Fix your own settings and assume the team is covered | Ask everyone who sends documents to check their own page |
Look for a Save button after changing a toggle | Trust the toggle: it saves the moment you click it |
Expect to change Push on the web | Treat Push as Coming Soon, except the two Community rows that allow it |
