š Overview
A proposal that never reaches the client is worse than one they ignore. You think the ball is in their court. They think you haven't priced the job yet. A week goes by, the client calls another builder, and nobody knows an email went missing until it's too late.
When a client or vendor says they didn't get something you sent from Structur, the cause is almost always one of a few settings or details you can check yourself. This checklist walks through them in order, starting with the quickest: the document's email status, your own Notification Settings, and the client's email address.
If you need the document in their hands right now, skip to step 7. Copy Link lets you send it yourself while you sort out the cause.
š Understanding Client Email Not Received
ā” What It Does
This checklist allows you and your team to:
Confirm whether an email actually went out -- using the document's email status
Find a setting that blocked the send -- your own Email toggle for that event
Catch address problems -- typos, spaces, and two client records sharing one email
Check who else should get it -- additional contacts and their Send notifications switch
Check a daily log's send -- with its Status and the project's recipients
Get the document to the client anyway -- with Copy Link
š When to Use It
This checklist is most valuable when you need to:
Answer a client who says they never got a proposal, change order or invoice
Check a send that shows a red envelope on the Proposals list
Check whether a daily log was emailed to your client
Get a document to a client today, before the cause is fixed
š Step-by-Step Instructions
1. Check the Document's Email Status
Start with what Structur recorded for the send.
For a proposal, open the Proposals list and hover the envelope next to the status
A blue envelope means Email: Delivered. A green envelope means the client opened it. A red envelope means Email: Bounced. A grey envelope means Email: Not sent: the proposal was marked as sent with Email the client turned off.
For a daily log, check the log's Status on the Daily Logs page: Sent or Saved Only
Note: A red Email: Bounced envelope doesn't always mean the client's mail server rejected it. Proposals sent before the November 2026 update with your own Email toggle off also show it. See step 2.
2. Check Your Own Email Toggle for That Event
This is the most common cause.
Click Settings in the left sidebar, then Notifications
Find the row for what you sent, for example Proposal sent to client, Invoice sent to client, Change Order to Client sent to client or Change Order to Subcontract sent to vendor
Make sure Email is on. If it's off, click it to turn it on. It saves straight away.
Go back to the document and send it again. For a proposal that's Pending Approval, click Submit to resend.
Your own Email toggle on these rows also decides whether the email goes to your client or vendor: Ballpark sent to client, Proposal sent to client, Proposal declined manually by company, Proposal voided by company, Change Order to Client sent to client (and its declined manually and voided by company rows), Change Order to Subcontract sent to vendor, Selection document sent to client, Submittal sent to vendor, Invoice sent to client, Invoice payment received, Invoice paid, Invoice voided, Bill paid and Subcontract paid by company. Each of these rows says "Turning Email off also stops the email to the client." (or "to the vendor.").
For ballparks, proposals, change orders, selections, submittals and invoices, the send window shows it too. Its email switch (such as Email the client) starts off when your toggle is off, the button reads Mark as Sent, and the message after sending says no email was sent. Turn the switch on to email the client or vendor for that send.
Important: Currently, rows with no send window, such as the declined, voided and paid rows, don't warn you. With one off, Structur still records the action but your client or vendor gets nothing. Every teammate who sends documents needs to check their own settings.
Subcontract Lien Waiver submitted to vendor works differently. With Email off, the send is refused with the message "Your notification preferences have "Subcontract Lien Waiver submitted to vendor" email turned off. Turn it on to send this lien waiver." Turn it on and send again.
On Subcontract sent to vendor, Bid package sent to vendor, RFI sent to client/vendor and Daily Log sent to client, your toggle only changes your own notifications. The client or vendor still gets their email. For those, go on to step 3.
Note: Currently, a new selection's email goes to the team member in Requested By, not to your client. Check the selection's Activity log for "Selection sent to", and send the link with Copy Link. See Send a Selection.
Note: Currently, an RFI never emails your client, even when Include Client lists them on the RFI. To send an RFI to your client, type their email under ADDITIONAL RECIPIENTS. See RFIs.
3. Check the Client's Email Address
Click Settings in the left sidebar, then Clients
Open the client and click Update Client
Check the email is spelled correctly, with no spaces before or after it
Look for the orange warning "Another client with this email already exists." under the email field
If you see that warning, more than one client record uses the same email. Sends to a shared address can fail, so give each client record its own email address, then send again.
4. Check Additional Contacts
If someone other than the main contact should get the email, they need to be added as a contact with notifications turned on.
In Settings > Clients, open the client and click Update Client
Under Additional Contacts, check the person is listed
To add someone, enter their Name and Email, turn on Send notifications under Notifications, and click Add Contact
Send notifications is off when you add a new contact, so turn it on for anyone who should get emails. Vendor contacts work the same way in Settings > Vendors > Update Vendor, where a contact who gets emails shows a green Notify chip.
5. For Daily Logs, Check the Log Itself
Check the log's Status on the Daily Logs page, or use the Sent and Saved Only tabs. Sent means the log was emailed with Create and Send. Saved Only means it was saved with Save Only and never emailed.
On a sent log, the Delivery section shows who it went to, with Resend and Rescind.
Check the project's daily log recipients in Default Notification Settings. Client must be on for your client to get the email. See Daily Log Settings.
To get a log to your client without emailing it, share it through the Client Portal from the row's three-dot menu with Share with client.
6. Ask the Client to Check Their Side
Ask the client to look in their spam or junk folder for an email from [email protected]
If they use the Client Portal, ask them to check their Notification settings there. They can turn some emails off for themselves, such as New Daily Logs, New Change Orders and New Invoices. See Client Portal.
7. Send the Link Yourself
When you need the document in the client's hands now, send it yourself.
Open the document and click Copy Link (proposals and selections have it on the document page)
Paste the link into your own email or a text message to the client
The client opens the document from the link, the same way they would from Structur's email.
ā Best Practices
Read the send window before you click -- if the button says Mark as Sent, your client won't get an email.
Keep Email on for every "sent to client" and "sent to vendor" row -- turning one off to quiet your inbox stops that document's email to your client.
Give every client record its own email -- two records sharing one address is a common reason sends fail.
Turn on Send notifications when you add a contact -- new contacts are added with it off.
Use Copy Link while you fix the cause -- the client gets the document today, and you can sort out the setting after.
ā Common Questions
Q: Structur said the document was sent. Why didn't my client get it?
A: The most common reason is your own Email toggle for that event in Settings > Notifications. For a ballpark, proposal, change order, selection, submittal or invoice, check whether it was sent with the email switch off (a proposal shows a grey Email: Not sent envelope). For declined, voided and paid emails, a toggle that's off stops the email without a warning. Turn it on and send again. If that's not it, work through steps 3 to 6.
Q: The Proposals list shows a red envelope that says Email: Bounced. What does that mean?
A: Usually the client's mail server rejected the email. On proposals sent before the November 2026 update, it can also mean the email was never sent because Proposal sent to client had Email off in your settings. Check the client's email address, then your settings, and send again.
Q: I turned the toggle back on. Will the email go out now?
A: No. Turning the toggle on doesn't resend anything. Send the document again. For a proposal that's Pending Approval, click Submit.
Q: My settings are fine, but my teammate's sends aren't arriving. Why?
A: Settings are per user. Your teammate needs to open their own Settings > Notifications and check the same rows.
Q: Why does the client email field say another client already uses it?
A: More than one client record has the same email address. Sends can fail when two clients share an email, so give each record its own address.
Q: The client's colleague didn't get the email. How do I add them?
A: Add them under Additional Contacts on the client in Settings > Clients, with Send notifications turned on.
Q: Who does the email come from?
A: Structur sends client emails from [email protected]. Ask your client to look for that address in their spam or junk folder.
ā ļø Common Mistakes to Avoid
ā Don't | ā Do |
Trust the "sent" message alone | Check the envelope on the Proposals list |
Turn off Email on "sent to client" rows to reduce email | Turn off Email only on rows about your team's own activity |
Fix your own settings and assume the team is covered | Ask everyone who sends documents to check their own settings |
Let two client records share one email | Give each client record its own email address |
Add a contact without turning on Send notifications | Turn on Send notifications for anyone who should get emails |
Wait days for the cause to be fixed | Use Copy Link to send the document yourself |
