š Overview
The first week in new software sets the pattern for every job after it. Skip the defaults and every estimator uses their own overhead and profit. Skip the cost codes and every budget is coded differently. Skip the client list and the same homeowner ends up in the system three times with three different emails. Fixing that later means fixing it on every document.
This article walks through setting up a new Structur account in the order that saves the most rework. Most of it happens in the Settings pop-up, opened from Settings in the left sidebar: your company details, your team, your cost codes, your clients and vendors, and your integrations. Each step links to the article with the full instructions.
You don't have to finish everything on day one. Steps 1 to 4 matter before anyone builds an estimate. The rest can follow as your team starts using each part of Structur.
š Understanding Company Setup
ā” What It Does
Setting up your company allows you and your team to:
Put your details on every document -- logo, name, location, license and website
Price consistently -- with default overhead, profit and tax on every new estimate
Give each person the right access -- with their own login, role and hourly rate
Code every cost the same way -- with Structur Standard, your own custom codes and Saved Items
Start with your contacts already in place -- by importing clients and vendors
Connect your books and mailbox -- with QuickBooks Online and the email integration
Make sure your documents reach clients -- by checking your notification settings
š When to Use It
Company setup is most valuable when you want to:
Get a new account ready before your team starts quoting
Bring a new office manager or admin up to speed on how the account is configured
Check that an existing account has its defaults and roles set the way you expect
Plan your first week in Structur
š Step-by-Step Instructions
1. Fill In Company Settings
Click Settings in the left sidebar
Click Company
Fill in the Company Profile card: logo, Name, Location, Contractor License #, License Expiration and Website
Under Configuration, choose your Currency, Unit of Measurement and Timezone
Turn on Enable default Overhead and Profit and enter your percentages, and decide on Compound profit on top of markup and overhead
Turn on Enable Tax Collection and Send ACH info with the invoice if you use them
Click Save Changes
Your company profile appears on your documents and to your clients. The overhead and profit defaults pre-fill on new estimates, budgets, proposals and change orders. See Company Settings.
Note: Defaults only apply to documents created after you set them. Set them before your team builds estimates.
2. Decide on Restore Mode
Enable Restore Mode in Settings > Company shows deleted records in their lists, greyed out and struck through, with a Restore button. With Restore Mode on, deleted projects and documents can be recovered for at least 60 days.
Restore Mode is company-wide, so it changes what everyone sees in their lists. You can turn it on when you need to recover something, then turn it off again. See Company Settings.
Important: Not everything comes back. Deleting a line, group or subgroup inside an estimate can't be undone, and a deleted daily log is permanent. Check the article for a module before you delete anything you might need.
3. Invite Your Team and Choose Roles
Open Settings > Permissions and review the default roles: Bookkeeper, Company Admin, Estimator, Field Crew, Foreman, Office Manager, Owner, Project Manager, Sales and Superintendent
Adjust each role's access, or create your own roles with + New Role
Open Settings > Users and click + New User for each teammate
Enter their name, email, Role and Hourly Rate, and decide on Assign a license seat
Click Create User
Each invited teammate gets an email to set up their account and shows as Pending until they accept. See Add and Manage Users and Roles and Permissions.
Note: Check the seat banner in the Create New User window before you click Create User. On a paid plan with no spare seat, it tells you that adding the user adds a paid license to your subscription.
Note: Roles with View Only or Collaborate on Leads Pipeline or Projects Pipeline see only the leads and projects they're assigned to in Manage Members on the record's Overview, for example as a Sales Rep or Project Manager. Give a role Full Access on those rows to let it see every lead or project.
4. Set Up Your Cost Codes
Open Settings > Cost Codes. It has three tabs:
Structur Standard -- a read-only library of over 4,400 codes, ready to use on estimates straight away. The last letter shows the cost type: L Labor, M Materials, S Subcontractors, E Equipment, O Other
Custom Codes -- your own codes, created with New Cost Code, copied from Structur Standard, or imported from the CSV template
Saved Items -- reusable, pre-filled line items for faster estimates
You don't have to copy standard codes before using them. See Cost Codes and Saved Items.
Important: Codes are shared across your estimates, budgets and reports. To keep old documents as they are, create a new code instead of renaming one that's already in use.
5. Bring In Your Clients and Vendors
Open Settings > Clients or Settings > Vendors
Click the upload icon
Choose Import CSV file and follow the steps, or choose Import from QuickBooks
Import from QuickBooks is available on higher-tier plans. On the Free plan it's greyed out with an Upgrade plan badge. You can also add clients and vendors one at a time with New Client and New Vendor. See Clients and Vendors.
Note: Set up custom fields in Client Field Settings before you import a large list, so the import and your team fill in the same details.
6. Check Your Notification Settings
Each person sets their own notifications in Settings > Notifications, with Web, Email and Push toggles for each event. Changes save as soon as you flip a toggle.
Important: Your own Email toggle on many rows, such as Proposal sent to client, Invoice sent to client and the change order "sent" rows, also controls whether the email goes to your client or vendor. These rows say "Turning Email off also stops the email to the client." Proposals, invoices and change orders show it in the send window too, but currently other documents, such as ballparks and selections, are marked as sent with no email and no warning. Notification Settings lists every row this applies to. Ask everyone who sends documents to keep these rows on. See Notification Settings.
7. Connect QuickBooks Online and Email
QuickBooks Online: it's in the Accounting section of Settings > Integrations, with a Connect button on the QuickBooks Online row. It's available on higher-tier plans. For connecting, what Structur sends to QuickBooks and mapping your cost codes, see QuickBooks Online.
Email: connect your company's mailbox once in Settings > Integrations. Structur connects one mailbox for the whole company, and each lead and project shows the threads to and from its client's email address. See Emails.
Note: Connecting QuickBooks affects your whole company. Leave it to the people who run your books.
8. Build Your Proposal and Estimate Templates
On the Estimates list, click Settings to check Default Overhead %, Default Profit %, Default Estimator and the other estimate defaults
Click Save As Template at the top of an estimate to reuse its structure on future jobs
Click Save as Template on a proposal to reuse its sections, wording and layout, and use Manage Templates on the Proposals list to edit, duplicate or delete templates
See Estimates and Proposals.
9. Set Up Your Pipelines and Website Form
Click Leads in the left sidebar, then Settings, to rename, add, reorder or hide your lead stages
Do the same from the Projects page for your project stages
Click Embed Form on the Leads page to build the form for your website and copy its code
See Pipeline Stages and Website Embed Form.
10. Transfer Ownership If Someone Else Should Own the Account
If the person who opened the account isn't the person who should own it, use Transfer Ownership in Settings > Company. The new owner must already be a Company Admin, so change their role in Settings > Users first. See Company Settings.
Important: When you transfer ownership, you lose ownership of the workspace and your role becomes Company Admin. Check you've picked the right person before you click.
11. Book a Kickstart Call
A Kickstart call is a 45-minute call with the Structur team to get you set up, including your workflows, your first project and your pipeline. Book it at structur.com/kickstart. See Getting Help.
ā Best Practices
Set defaults before anyone estimates -- overhead, profit and tax only pre-fill on new documents, so early estimates keep whatever was there.
Review every default role before you invite people -- most default roles start at View Only everywhere, which may be more or less than you want.
Import clients and vendors before adding them by hand -- one import avoids the same client being created twice under slightly different names.
Start from Structur Standard -- it's ready to use, and you only need custom codes for what it doesn't cover.
Keep Email on for every "sent to client" row -- turning it off silently stops your own document emails.
Agree where payments and invoices start -- entering the same document in Structur and in your accounting system creates duplicates.
Book the Kickstart call early -- it's easier to set things up right than to fix them across a dozen jobs.
ā Common Questions
Q: How long does setup take?
A: It depends on how much you bring in. Company settings and roles take minutes. Importing clients, vendors and custom cost codes takes longer if your lists need cleaning up first. A Kickstart call helps you do it in the right order.
Q: Do I have to set up cost codes before my first estimate?
A: No. Structur Standard codes are ready to use on estimates straight away. Add Custom Codes only for work the standard library doesn't cover.
Q: Where do I connect QuickBooks Online?
A: In Settings > Integrations, on the QuickBooks Online row in the Accounting section. It's available on higher-tier plans. See QuickBooks Online.
Q: Will changing my defaults update existing estimates?
A: No. Defaults pre-fill on new estimates, budgets, proposals and change orders. Change an existing estimate's percentages on the estimate itself.
Q: How long can deleted items be recovered?
A: With Enable Restore Mode on, deleted projects and documents can be recovered for at least 60 days. Some items, like lines deleted inside an estimate and deleted daily logs, can't be restored. See Company Settings.
Q: My client didn't get the proposal I sent. What should I check first?
A: Check your own Email toggle on Proposal sent to client in Settings > Notifications, then the client's email address. See Client Email Not Received for the full checklist.
Q: Who should set up the account?
A: The owner or a Company Admin. Company Admin starts with Full Access everywhere. Who can open each Settings tab is set on the Settings rows in Settings > Permissions.
ā ļø Common Mistakes to Avoid
ā Don't | ā Do |
Let estimators start before defaults are set | Set overhead, profit and tax in Settings > Company first |
Invite your team without checking the default roles | Review Settings > Permissions, then invite people with the right role |
Rename a cost code that's already on estimates | Create a new code and use it from now on |
Enter the same payment in Structur and in your accounting system | Agree with your team where each payment starts |
Turn off Email on "sent to client" rows to cut inbox noise | Keep them on, and turn off Email on other events instead |
Leave Restore Mode on all the time | Turn it on to recover something, then turn it off |
