Skip to main content

Company Settings

Company Profile, currency, units and timezone, document numbering, cost code display, default Overhead and Profit, tax, ACH info on invoices, Restore Mode, and transferring ownership of your workspace.

Written by Support

šŸ“‹ Overview

The details on your proposals, invoices and change orders should never depend on who built the document. One estimator uses 10% overhead, another uses 15%. Someone forgets the tax. The license number on the proposal expired last spring. Each one is a small slip, but together they cost you margin and make you look less professional to your clients.

Company Settings is where you set those details once for the whole workspace. It lives in Settings > Company and holds your company profile and logo, your currency, units and timezone, your default overhead and profit, tax and ACH options, Restore Mode, and Transfer Ownership. It's also where you choose how documents are numbered and how cost codes show.

Everything on this tab is company-wide. The footer says so on every change: "Changes apply across the entire workspace."


šŸ” Understanding Company Settings

⚔ What It Does

Settings > Company allows you to:

  • Set your company profile -- logo, name, location, contractor license and website, shown on your documents and to your clients

  • Choose your currency, unit of measurement and timezone for the whole workspace

  • Choose how documents are numbered -- one running number across the workspace, or a fresh count in each project and lead

  • Choose how cost codes show -- with the code in front of the name, or the name only

  • Pre-fill overhead and profit on new estimates, budgets, proposals and change orders, with an option to compound profit

  • Turn on tax collection for invoices, proposals and change orders

  • Add your ACH details to outgoing invoice PDFs

  • Turn on Restore Mode to see and recover deleted projects and documents

  • Transfer ownership of the workspace to another team member

šŸ“… When to Use It

Company Settings is most valuable when you want to:

  • Set up a new workspace before your team starts building estimates

  • Keep markup consistent across every estimator

  • Update your logo or license details on client-facing documents

  • Recover something a teammate deleted by mistake

  • Hand the account over to a new owner


šŸ“ Step-by-Step Instructions

1. Open Company Settings

  1. Click Settings in the left sidebar

  2. Click Company

The tab has three cards: Company Profile, Configuration and Transfer Ownership. After any change, click Save Changes at the bottom of the window, or Cancel to discard it.

Note: Who can open this tab is set on the Company row, under Settings, in Settings > Permissions.


2. Fill In Your Company Profile

Company Profile holds the "Identifying information shown on documents, proposals, and to your clients."

  1. Under Company logo, click Upload Logo. Use a square SVG or PNG, at least 256Ɨ256 px

  2. Enter your company Name (required)

  3. Enter your Location, for example "Austin, TX"

  4. Enter your Contractor License # and pick the License Expiration date from the calendar

  5. Enter your Website. The "https://" part is already filled in

  6. Click Save Changes


3. Set Currency, Units and Timezone

Under Configuration, choose your Currency, Unit of Measurement and Timezone. All three are required.

  • Currency -- one of 21: USD, CAD, GBP, AUD, EUR, NZD, CNY, ZAR, MXN, INR, SGD, CHF, AED, SAR, SEK, NOK, DKK, ILS, XPF, PHP and JMD. Documents show the currency symbol

  • Unit of Measurement -- US Standard or Metric

  • Timezone -- search the list, for example "(GMT-5) America/New York"

Below them, Configuration has two more choices:

  • Document numbering -- Global across workspace ("Numbers increment continuously across every project. Best for unique IDs in audits and accounting.") or Per project / lead ("Each project and lead starts its own numbering at #1. Easier to reference inside one job.")

  • Cost code display -- Show code with name ("Cost codes appear prefixed on every line item, document, and report.") or Show name only ("Hides the code prefix. The cost code is still tracked behind the scenes for budgets and reports.")

Each option shows a small preview of how it looks. Click Save Changes when you're done.


4. Set Default Overhead and Profit

  1. Turn on Enable default Overhead and Profit

  2. Enter your Overhead and Profit percentages

  3. Turn Compound profit on top of markup and overhead on or off

  4. Click Save Changes

These percentages pre-fill on new estimates, budgets, proposals and change orders. With Compound profit on, profit is calculated on top of markup and overhead. With it off, "profit is calculated on the base cost only." The Compound setting applies to new estimates.

Note: Changing these defaults doesn't change documents you've already created. Update an existing estimate's percentages on the estimate itself.


5. Turn On Tax and ACH

Enable Tax Collection applies "sales tax on invoices, proposals, and change orders." When you turn it on, set your tax rate and choose whether to Apply Tax on top of Overhead and Profit.

Send ACH info with the invoice adds "your routing and account number on outgoing invoice PDFs." When you turn it on, enter the bank details you want your clients to see.

Click Save Changes after either one.


6. Turn On Restore Mode

  1. Turn on Enable Restore Mode

  2. Click Save Changes

  3. Find the deleted item in its list and click Restore

You'll see "Company information was updated successfully." With Restore Mode on, "Deleted projects and documents can still be recovered for 60 days before permanent removal." Deleted records show in their lists greyed out and struck through, with Restore (in the Projects list view, it's in the row's three-dot menu). That includes records deleted while Restore Mode was off, as long as it's within 60 days. Turn Restore Mode off and click Save Changes to hide them again.

Note: Restore Mode is company-wide, so it changes what everyone in your workspace sees in their lists.


7. Transfer Ownership

Use this when someone else should own the workspace, for example when a business partner takes over the account. Only the current Owner sees the Transfer Ownership card. If you're not the Owner, ask them to do it.

  1. In the Transfer Ownership card, click Select the new owner and pick them

  2. Tick "I understand that I will lose ownership and become Company Admin."

  3. Click Transfer Ownership

The button stays greyed out until you've picked someone and ticked the box. The list shows the people on your team, whatever their role, so the new owner doesn't need to be a Company Admin first. People you've invited who haven't accepted yet don't appear.

Important: When you click Transfer Ownership, you lose ownership of the workspace. Your role becomes Company Admin, and the new owner gains full billing and member-management rights. Check you've picked the right person before you click.


⭐ Best Practices

  • Set your defaults before your team builds estimates -- overhead and profit pre-fill on new documents only, so documents created first keep the old values.

  • Agree on Compound profit with your estimators -- the same percentages give a different price with it on or off, and mixed approaches make bids hard to compare.

  • Keep your license expiration current -- it's shown to clients, and an expired date undermines a proposal.

  • Turn Restore Mode on when you need it, then off again -- while it's on, deleted records show struck through in everyone's lists, which clutters day-to-day work.

  • Have the new owner accept their invite before you transfer -- pending invitees don't appear in the Select the new owner list.


ā“ Common Questions

Q: I changed my default overhead and profit. Why didn't my existing estimate change?

A: The defaults pre-fill on new estimates, budgets, proposals and change orders. Documents you already created keep their own percentages. Change them on the document itself.


Q: What does Compound profit do?

A: With Compound profit on top of markup and overhead turned on, profit is calculated on the cost plus markup and overhead. With it off, profit is calculated on the base cost only. It applies to new estimates.


Q: How long can I recover deleted items?

A: With Enable Restore Mode on, deleted projects and documents can be recovered for 60 days before they're removed for good. Turn it on, find the item in its list, and click Restore.


Q: I turned on Restore Mode. Why do I see crossed-out items everywhere?

A: Those are deleted records, shown so you can restore them. Turn Enable Restore Mode off and click Save Changes to hide them again.


Q: Does the new owner need to be a Company Admin first?

A: No. Anyone on your team can be picked, whatever their role, for example a Project Manager. Once the transfer is done they're the Owner, and you become a Company Admin.


Q: Why can't I find the person I want to make owner?

A: The list only shows people who are already on your team. If you've just invited them, they appear once they accept the invite. Invite them in Settings > Users if needed, then come back to Transfer Ownership.


āš ļø Common Mistakes to Avoid

āŒ Don't

āœ… Do

Change your O&P defaults and expect open estimates to update

Update existing estimates on the estimate itself

Leave Restore Mode on after you've recovered what you needed

Turn it off again so deleted records stay out of your lists

Transfer ownership without checking who you picked

Check the name in Select the new owner before you tick the box

Forget to click Save Changes

Save before you close Settings or switch tabs

Let your license expiration date lapse

Update it when your license renews

Did this answer your question?