Skip to main content

RFIs

Covers the RFIs list and All Projects view, creating an RFI, recipients, the question, sending, Ball in Court, editing, closing and reopening, links, deleting and restoring, and the Home RFI Tracker.

Written by Support

šŸ“‹ Overview

Every job has questions the drawings don't answer. A door swing that conflicts with the framing plan. A beam size missing from the structural sheets. A finish the owner never picked. When those questions go out in a text or get buried in an email thread, nobody knows who owes the answer, the crew waits, and months later nobody can prove what was agreed.

RFIs (Requests for Information) give each question its own numbered record inside the lead or project. You write the question, send it to the vendors who need to answer, and they reply on a link with no Structur login. Every answer, status change and send is kept on the RFI, and Ball in Court shows whether you or the recipient needs to act next.

This article covers creating, sending and managing RFIs. For what recipients receive and how answers work, see RFI Emails and Responses.


šŸ” Understanding RFIs

⚔ What It Does

RFIs allow you and your team to:

  • Create numbered RFIs in any lead or project, with numbers that run across your whole company

  • Set who asked and when you need an answer with Requested By and a Due Date

  • Send to vendors and extra email addresses -- add vendors with New Recipient, and anyone else with Additional Recipients

  • Write the question in a rich text editor with headings, lists, links and formatting

  • See who needs to act with Ball in Court on the list and on the RFI

  • Edit, close and reopen an RFI as the question moves along

  • Track every RFI in one place with the All Projects view and the RFI Tracker on Home

  • Delete and restore RFIs when Restore Mode is on

šŸ“… When to Use It

RFIs are most valuable when you need to:

  • Get a written answer from a vendor, architect or engineer before work goes ahead

  • Clarify a conflict between drawings, specs or site conditions

  • Keep a record of a question that could turn into a change order or a dispute

  • See every open question on a job, and who is holding each one


šŸ“ Step-by-Step Instructions

1. Open RFIs

  1. Open the lead or project

  2. Click RFIs in the module bar along the top (under Project Management)

Four cards across the top count your RFIs: Draft, Submitted (with how many are overdue), Answered and Closed. Below them, the All, Draft, Submitted, Answered and Closed tabs show a count each.

The columns are Number, Title, Due Date, Days Overdue, Ball in Court, Status and Created. Days Overdue shows how many days a submitted RFI is past its due date. Click a column heading to sort, type in Search RFIs... to find an RFI by its title or number, or use the List / Grid toggle to switch to cards. Click Open on a row to open the RFI.

Note: Currently, an answer doesn't change an RFI's status. Answered RFIs stay under Submitted, so the Answered card stays at 0. Close an RFI once it's settled.


2. Create an RFI

  1. Click New RFI in the top right

  2. In the Create New RFI window, enter a Title

  3. Check the Number. It's filled in with your next RFI number, and you can change it

  4. Click Create RFI

You'll see "RFI created". The RFI opens in Draft. RFI numbers run across your whole company, not per project, so a project's first RFI may not be 0001. You can still change the RFI # while the RFI is a Draft.

There is no Save button. Everything you enter on the RFI saves as you go.


3. Fill In Basic Info

Under BASIC INFO:

  1. Check the Title

  2. Choose Requested By. It defaults to you and lists your team members

  3. Pick a Due Date

Note: Structur accepts a due date in the past. Double-check the date when you set it.


4. Add Recipients

  1. Under RECIPIENTS, click + New Recipient

  2. Search for the vendor and tick the box next to their name

  3. Click Add Recipients

  4. In the recipients table, select the Primary Contact

The New Recipient window lists vendors only. To add a vendor who isn't in Structur yet, click Add New Vendor, fill in at least the Company Name, and click Create.

To copy in anyone else, click the box under ADDITIONAL RECIPIENTS. Pick a team member from the list, or type an email address and press Enter. A team member you pick is only emailed if they've turned on RFI sent to client/vendor in their own Settings > Notifications. See RFI Emails and Responses. Check that each address shows as a chip, because an address Structur doesn't recognise as an email is dropped without a message.

The RECIPIENTS section also has an Include Client switch. Turn it on to add the project's client to the recipients table, with the title Client.

Note: With Include Client on, your project's client gets the RFI email and can answer from it, like any other recipient.

Note: Every contact on the vendor who has Send notifications turned on gets the RFI email, not only the contact you see in the table. Check the vendor's contacts before you send.

Note: While the RFI is a Draft, the three-dot menu on a recipient row has View As Recipient, Copy Recipient Link and Delete. After you send, it has Set Ball In Court, View As Recipient and Copy Recipient Link.


5. Write the Question

Type your question in the QUESTION box. The toolbar has bold, italic, lists, headings, links and more. Each RFI holds one question.

To add supporting files, use Click To Upload or drag and drop below the question. Each file shows under the question, and recipients see it on their RFI page.


6. Send the RFI

  1. Check that the RFI has at least one recipient and a question

  2. Click Send RFI in the top right

  3. Check the email addresses under Recipients

  4. Add a Message if you want one. It's optional

  5. Click Send

You'll see "RFI sent successfully!" The RFI moves to Submitted and the page becomes read-only. The header changes to Mark as Closed, Edit, Copy Link, Download and Preview. REQUESTED BY and RFI DETAILS boxes appear, the recipients table gets a Ball In Court column, and the Activity log records "RFI sent by email". A RESPONSE box with Send Response appears below the question for your team's replies.

Note: Currently, Send RFI goes through even when the RFI has no recipients or no question. The RFI still moves to Submitted, but nobody is emailed. Check both before you click Send.


7. Follow Ball in Court

Ball in Court shows who needs to act next:

  • After you send, the ball is with the recipient

  • When a recipient answers, it moves to your team member

  • When your team replies, it moves back to the recipient

You'll find it in the Ball in Court column of the list and on the recipients table inside the RFI. Answering doesn't change the status, so an answered RFI stays Submitted until you close it.


8. Edit a Sent RFI

  1. Open the Submitted RFI

  2. Click Edit

You'll see "RFI changed back to Draft". The RFI goes straight back to Draft, with no confirmation, and every field can be changed again. Earlier responses are kept. While it's a Draft, recipients can still open their link and read the responses, but they can't answer. Click Send RFI again when you're done.


9. Close or Reopen an RFI

To close: open a Submitted RFI and click Mark as Closed. You'll see "RFI marked as closed". It closes straight away, with no confirmation, and the recipients get an email saying you closed it. Their link becomes read-only.

To reopen: open the Closed RFI and click Reopen RFI. You'll see "RFI reopened". It goes back to Submitted, with no confirmation, and the ball returns to the recipient. Recipients aren't emailed when you reopen, so let them know yourself.

Note: A Draft can't be closed, and a Closed RFI has no Edit. Reopen it first if you need to make changes.


10. View RFIs Across All Projects

  1. Click the project name in the breadcrumb at the top

  2. Click Show All Projects

The list adds a Project column and searches across every project. Click the filter icon and turn on Include completed projects to see RFIs on completed projects too. They're hidden by default. Leads have the same view under All Leads.


11. Copy Link, Preview and Download

At the top of the RFI:

  • Copy Link copies a link to the RFI's recipient page. Anyone with it can read the RFI, but can't answer from it

  • Preview opens the recipient page in a new tab, so you see what recipients see

  • Download is in the same row of buttons

Note: To give someone a link they can answer from, use Copy Recipient Link on their row in the recipients table instead. It's on the row's three-dot menu before and after you send. You'll see "Recipient link copied to clipboard".


12. Delete and Restore an RFI

  1. On the RFIs list, click the three-dot menu on the row

  2. Click Delete

  3. Click Delete in the Delete Request for Information window

If Restore Mode is on for your company (Settings > Company), the RFI stays in the list struck through, with Restore in place of Open. Click Restore to bring it back. Recipient links to a deleted RFI show RFI Not Found.

Important: The delete window says the action can't be undone. With Restore Mode on, you can restore the RFI. If Restore Mode is off in your company, treat Delete as permanent and check with your admin first.


13. Track RFIs from Home

Add the RFI Tracker widget to your Home to see how many RFIs are Open, Answered and Closed, plus your newest RFIs. Click an RFI number to open it, or View All for the full list. See Home for adding widgets.

Note: The RFI Tracker counts an answered RFI as Answered, while the RFI itself stays Submitted.


⭐ Best Practices

  • Ask one question per RFI -- each RFI holds one question, and separate RFIs can be answered and closed on their own.

  • Write a title that names the drawing or location -- "Door swing at Unit 2B, sheet A-201" is easy to find later, "Door question" is not.

  • Set the Primary Contact before you send -- it tells everyone whose answer you're waiting on.

  • Check recipients and the question before Send -- Send RFI works even when either is missing, and nobody gets the email.

  • Check Ball in Court every day -- you aren't emailed when a vendor answers, so the list and the bell are how you find out.

  • Close RFIs once they're settled -- an answered RFI stays Submitted, so only closing it shows the question is done.

  • Put the decision in a final response before closing -- the answer then stays on record with the RFI.


ā“ Common Questions

Q: What is an RFI?

A: A Request for Information is a formal written question to someone outside your company, usually a vendor, architect or engineer, about something the plans or specs don't make clear. In Structur each RFI has its own number, question, answers and history.


Q: Why doesn't my project's first RFI start at 0001?

A: RFI numbers run across your whole company, not per project. You can change the number on an RFI while it's still a Draft.


Q: Can I send an RFI to my client or someone who isn't a vendor?

A: New Recipient lists vendors only. To include anyone else, type their email under ADDITIONAL RECIPIENTS. Additional recipients get the email and can answer on their link. To send it to your project's client, turn on Include Client.


Q: Does an RFI show as overdue when the due date passes?

A: Yes, while it's Submitted. The Days Overdue column shows how many days late it is, and the Submitted card shows how many are overdue.


Q: Why is my answered RFI still Submitted?

A: Answers don't change the status. An RFI stays Submitted until you click Mark as Closed. Check Ball in Court to see whether the recipient has answered.


Q: How do I change an RFI I already sent?

A: Click Edit. The RFI goes back to Draft so you can change it, and you then send it again. Responses are kept.


Q: Can I get a deleted RFI back?

A: Yes, if Restore Mode is on for your company. The deleted RFI stays in the list with a Restore button. If Restore Mode is off, check with your admin before deleting.


āš ļø Common Mistakes to Avoid

āŒ Don't

āœ… Do

Send an RFI before adding a recipient and a question

Check both, then click Send RFI

Wait for an email to tell you a vendor answered

Check Ball in Court and the bell

Leave answered RFIs open

Mark them as Closed once the question is settled

Give recipients the header Copy Link to answer from

Send them their Copy Recipient Link

Reopen an RFI and assume the vendor knows

Tell the recipients yourself, since Reopen sends no email

Did this answer your question?