Skip to main content

Warranty

Covers setting up warranty coverage on a project, sending the warranty email, logging service requests, deciding coverage, assigning the work, scheduling visits, completing repairs, homeowner sign-off, reports and Warranty Settings.

Written by Support

📋 Overview

The job closed out eight months ago, and the homeowner texts your superintendent about a drip under the kitchen sink. He means to pass it on. Three weeks later she calls the office, angry that nobody answered. Now you have to work out whether it's covered, which sub did the plumbing, who pays, and when someone can get there, and none of it was ever written down.

Warranty keeps every service request on the project it belongs to. You set the coverage terms and the start date once, the homeowner sends requests with photos from a link, and each problem moves through the same steps: decide coverage, assign the work, schedule the visit, complete the repair and get the homeowner's sign-off. A response clock on every request shows how long the homeowner has been waiting.

Homeowners and subcontractors never need a login. The homeowner follows their request, picks a visit time and signs off from their own page. A subcontractor accepts the work, offers times and marks it complete from theirs.


🔍 Understanding Warranty

⚡ What It Does

Warranty allows you and your team to:

  • Set coverage terms for each project -- a start date and a term for each coverage, such as 1 year for workmanship and 10 years for structural

  • Send the homeowner their warranty -- an email with each term, your warranty documents and a link to request service

  • Take requests from a link -- the homeowner lists each problem with photos, with no login

  • Log requests that come in another way -- by phone, email, text or a walkthrough

  • Decide coverage on each item -- covered or not covered, and who pays

  • Assign the work -- to a teammate, a subcontractor or a manufacturer

  • Schedule the visit -- offer the homeowner up to 3 times, or set the visit yourself

  • Close the loop -- the homeowner signs off on the finished repair, or you close it with a reason

  • Watch response times -- every request counts down from your response window

  • Report on warranty work -- open items by age, cost by who pays, and results by category, assignee and project manager

📅 When to Use It

Warranty is most valuable when you want to:

  • Hand a finished project over with clear coverage terms and one place to ask for service

  • Stop warranty requests living in someone's phone

  • Send a covered repair back to the subcontractor who did the work

  • Prove what was reported, what was done and that the homeowner signed off

  • See which requests have gone unanswered


📝 Step-by-Step Instructions

1. Open Warranty

  1. Click Projects in the left sidebar and open the project

  2. Click Warranty in the module bar along the top (the last tab under Project Management)

The page shows four cards: Open, Overdue Response, Awaiting Sign-off and Avg Time to Close. Below them are the tabs All, To Review, Scheduled, In Progress, Completed and Closed, a search box, a Filter icon, and the List, Grid and Visits views. The buttons at the top are Export, Reports, Settings and New Service Request.

Note: Who can use Warranty is set on the Warranty row in Settings > Permissions. View Only can see requests and reports. Collaborate can log requests, decide coverage, assign, schedule, complete and close items. Full Access can also delete service requests and change Warranty Settings. What other roles can see and do depends on their permissions in Settings > Permissions.


2. Set Up Coverage on a Project

Each project has its own warranty record. You'll find it on the project's Overview, in the Warranty Coverage card under Project Details.

  1. On the project's Overview, click Edit on the Warranty Coverage card

  2. Under Warranty Start, set the Start date. This is usually the substantial completion date

  3. Check the terms under Coverage. Each one shows its length and the date it ends, for example "1 year ¡ ends 10/31/2027"

  4. To change the terms for this project, click Edit Coverage. Change the Coverage name, the Term in months or the Exclusions, turn on Manufacturer warranty for pass-through items, or click New Coverage. Click Save Coverage

  5. Under Homeowner, add the Service address. The name, email and phone come from the project's client

  6. Under Documents, add your warranty certificates, O&M manuals and manufacturer warranties. Files can be up to 25 MB

  7. Click Close

New projects start with your company's default terms: Workmanship 1 year, Plumbing, Electrical and Mechanical (HVAC) 2 years, Structural 10 years, and Appliances and Manufacturer Items under the manufacturer's warranty.

Note: Until a start date is set, the card reads Not Started and the window warns "Coverage has not started". Requests can't be checked against a term until the warranty has a start date.

Note: To change the homeowner's name, email or phone, edit the client in Project Details. The warranty record follows the client.

Note: The Check-ins section shows the emails Structur will send the homeowner after the warranty starts, such as "30-Day Check-in" and "11-Month Walkthrough", with the date each one goes out. You choose which check-ins to send in Warranty Settings (step 11).


3. Send the Warranty Email

  1. In the Warranty Coverage window, click Send Warranty Email

  2. Structur asks "Send the warranty email?" and shows the address it's going to. Click Send Email

You see "Warranty email sent". The homeowner gets each coverage term and when it ends, your warranty documents and the link to request service. The window then shows when it was sent, with a Send Again button.

Note: The warranty email is only sent when you click the button. It needs a homeowner email, and Accept requests by link has to be on.

Note: To send the link yourself, click Copy Request Link on the Warranty Coverage card. To stop taking requests by link, turn off Accept requests by link in the window.


4. Log a Service Request

Requests reach you in two ways.

The homeowner sends one. They open the request link, enter their name and email, and describe each problem: what it is, where it is, what kind of problem, how urgent, and photos. The page also shows them what's covered and until when. When they click Send Request, the request appears on the project's Warranty page.

You log one for them. Use this when the homeowner calls, emails or texts, or you find something on a walkthrough.

  1. Click New Service Request

  2. Check the Homeowner, Phone, Email and Service address. The homeowner's details are filled in from the project's client

  3. Choose Received by: Phone Call, Email, Text Message, Walkthrough or Other, and set Received on

  4. Under Item 1, enter the Problem (required), the Location, the Category, the Urgency (Low, Normal or Urgent) and any Details. Add photos with Photo

  5. Click New Item to add another problem to the same request

  6. Click Create Service Request

You see "Service request created" and the request opens with a number, such as #0001. The homeowner gets an email saying you received it, with a link to follow its status.

Note: The Category list is the project's coverage terms plus Other. The category decides which term the problem is checked against.

Note: On the Free plan, logging a service request uses 10 credits. Requests the homeowner sends from their link don't use credits.


5. Decide Coverage

Each item on a request starts as New with a banner that reads "Decide coverage".

  1. On the item, click Decide Coverage

  2. Read the check at the top. In Term means the problem was reported inside its coverage term

  3. Choose Covered under warranty or Not covered

  4. If it's covered, choose Who pays for the repair: Our company, The subcontractor who did the work or The manufacturer. Add a Note if you like. The homeowner sees it

  5. If it's not covered, enter the Reason (required). The homeowner sees it. Choose an Exclusion (Normal wear and tear, Damage or misuse, Homeowner maintenance or Other) and how you'll bill the homeowner: Change Order or Invoice

  6. Click Save Decision

You see "Coverage decision saved". The item moves to Under Review, and the homeowner gets an email with the decision. For an item that's not covered, the banner then reads "Send the homeowner the change order or invoice, then assign the work once they accept. Decline the item if they do not."

Note: The check is a guide. Structur never declines an item for you, so you still decide, even when the term has ended.


6. Assign the Work

  1. On the item, click Assign

  2. Under Assign to, search your team and vendors and pick who will do the work. To send it to a manufacturer instead, turn on Send to a manufacturer, enter the Manufacturer (required) and their Claim phone or email

  3. Set a Due date if you want one

  4. Click Assign

A teammate sees the item assigned to them. A vendor gets an email with a link to their work order, where they click Accept or Decline. No login is needed. On the item, the vendor shows as Link Sent until they answer, then Accepted.

Note: You have to decide coverage before you can assign an item.

Note: The vendor sees the problem, the homeowner's photos, the homeowner's name, phone and address, and the due date. They don't see costs.


7. Schedule the Visit

  1. On the item, click Offer Visit Times

  2. Set the date, Start and End for Option 1. Click Another Time to offer up to 3

  3. Click Send Times to Homeowner

The homeowner gets an email and picks a time on their status page. The item moves to Scheduled and shows the visit as "picked by the homeowner", with Add to Calendar.

A vendor can offer the times for you. After they accept the work order, their page has an Offer Visit Times card, and the homeowner picks from those times the same way.

Note: Already agreed a time by phone? Click Set Visit on the item's Visit row to book it yourself.

Note: Scheduled visits also show on the Visits view of the Warranty page, a month calendar with each visit on its day.


8. Complete the Work

  1. On the day, click Start Work. The item moves to In Progress

  2. When the repair is done, click Mark Complete

  3. In What was done (required), describe the repair. Add After photos to show the finished work

  4. Click Mark Complete

You see "Marked complete. The homeowner was asked to sign off." The item moves to Completed.

A vendor does the same from their work order page: Start Work, then What was done, After photos and Mark Complete.


9. Get the Homeowner's Sign-off

The homeowner gets an email asking them to confirm the repair. On their status page they click Confirm Repairs, check the work that was done, enter their name, sign and click Sign and Confirm. They can type, draw or upload a signature.

The item moves to Closed and shows the signature, the name and the time. When every item on a request is closed, the request is Closed.

If the homeowner confirmed another way:

  1. On the completed item, click Close Without Sign-off

  2. Under Why, enter the reason, for example "The homeowner confirmed the repair by phone"

  3. Click Close Item

Note: Completed work that nobody signs closes on its own after the number of days set in Warranty Settings (7 by default).

Note: Once a request is closed, the homeowner can rate it from 1 to 5 stars on their status page.


10. Track Requests and Response Times

Every request has a response clock. It starts when the request is reported and stops at your team's first action on it, such as deciding coverage or assigning the work. The Response column shows Due with the time left, Overdue once the window has passed, or Responded.

On the Warranty page:

  • The Overdue Response card counts requests that have had no response inside your window

  • The To Review tab holds items that are New or Under Review, and the Closed tab holds Closed and Declined

  • Click the Filter icon to narrow the list by date reported, status or response

  • Click Reports for open items by age, average first response, average time to close, homeowner rating, and cost by who pays, category, assignee, project manager, month and year

  • Click Export and choose Export PDF or Export CSV

Open a request to see everything about it: the homeowner, each item with its coverage, assignee, visit, work, sign-off and cost, your Messages with the homeowner, the Emails Structur sent and whether each was delivered, and the Activity log.

Note: A request shows the status of its least advanced item. A request with one closed item and one new item reads New.


11. Set Your Company's Warranty Settings

  1. On the Warranty page, click Settings

  2. Under Response, set Respond within (48 hours by default) and Close unsigned work after (7 days by default; 0 waits for the homeowner indefinitely)

  3. Under Homeowner Check-ins, choose which emails to send: 30-Day Check-in, 6-Month Check-in and 11-Month Walkthrough

  4. Under Homeowner Rating, paste your Google review link if you want homeowners who rate a request 4 or 5 stars to be offered your review page

  5. Under Default Coverage, set the terms new warranty records start with

  6. Click Save Changes

Note: Warranty Settings apply to your whole company. Changing Default Coverage only affects warranty records created afterwards. To change one project's terms, use Edit Coverage on that project (step 2).


12. Decline, Reopen or Delete

  • Decline Item -- in the three-dot menu on an item. Enter a Reason (required) and click Decline Item. The homeowner is told it won't be repaired under warranty. You can't decline an item once work has started

  • Reopen Item -- in the three-dot menu on a completed, closed or declined item. Enter a Reason (required). The item goes back to review, and its visit and sign-off are cleared

  • Delete -- on the request, or in the three-dot menu on its row. Structur asks "Delete service request?" and you confirm with Delete service request

Important: Deleting a service request removes the request and all of its items, and the homeowner and vendor links stop working. It can't be brought back from the Warranty page. To stop work on one problem and keep the record, decline the item instead.


⭐ Best Practices

  • Set the start date at closeout -- until the warranty has a start date, nothing can be checked against a term and no check-ins go out.

  • Send the warranty email at handover -- it gives the homeowner one link for every problem, so requests stop arriving by text to whoever they spoke to last.

  • List each problem as its own item -- coverage, the assignee and sign-off are tracked per item, and a drip and a cracked tile rarely go to the same trade.

  • Decide coverage first, even when the answer is easy -- it stops the response clock and tells the homeowner where they stand the same day.

  • Assign covered work to the sub who did it -- they get their own link to accept, schedule and complete the repair, so you aren't relaying messages.

  • Ask for after photos -- a photo and a signature settle a dispute that a note in a daily log won't.

  • Check Overdue Response every morning -- it's the list of homeowners who are still waiting to hear from you.


❓ Common Questions

Q: Do homeowners or subcontractors need a Structur login?

A: No. The homeowner sends requests, follows status, picks a visit time and signs off from links in their emails. A vendor accepts the work, offers times and marks it complete from the link in theirs.


Q: Can the homeowner send a request from the client portal?

A: Currently, the client portal has no Warranty tab. Homeowners use the request link instead. Send it with Send Warranty Email, or click Copy Request Link on the Warranty Coverage card and send it yourself.


Q: What starts the warranty?

A: The Start date on the project's Warranty Coverage. Each term ends the day before its anniversary, so a 1-year term that starts 11/01/2026 ends 10/31/2027.


Q: Can one project have different terms from the rest?

A: Yes. Click Edit Coverage on that project's Warranty Coverage. It changes that project only. Your company defaults in Warranty Settings stay as they are.


Q: A problem was reported after the term ended. Is it declined automatically?

A: No. The check tells you the term has ended, and you decide. Choose Not covered with a reason, or cover it anyway.


Q: How do I bill the homeowner for work that isn't covered?

A: Choose Not covered and pick Change Order or Invoice. Currently, Warranty doesn't create the change order or invoice for you. Create it in Change Orders or Invoices, then click Edit on the item's Cost row. In Cost and Billing, enter the Price to the homeowner, pick the change order or invoice under Link change order and click Save. New Change Order opens a new tab to create one.


Q: What counts as a response?

A: Your team's first action on an item: deciding coverage, assigning it, offering or setting a visit, starting or completing the work, closing or declining it. Sending a message doesn't stop the clock.


Q: The subcontractor declined the work. What now?

A: The item shows that the vendor declined, with their reason, and a Reassign button. Assign it to someone else. The first vendor's link stops working.


Q: Can I change something after an item is closed?

A: Open the item's three-dot menu and click Reopen Item. The item goes back to review with its visit and sign-off cleared, and it keeps its history.


⚠️ Common Mistakes to Avoid

❌ Don't

✅ Do

Leave the warranty start date empty

Set the Start date at closeout so every request is checked against its term

Put three problems in one item

Click New Item for each problem so each one gets its own coverage, assignee and sign-off

Answer the homeowner by text and leave the request untouched

Decide coverage on the request, which stops the response clock and emails the homeowner

Change the company defaults to fix one project's terms

Use Edit Coverage on that project's Warranty Coverage

Delete a request because one item isn't covered

Decline that item with a reason and keep the record

Mark work complete with no description

Say what was done and add after photos before the homeowner signs off

Did this answer your question?