š Overview
A price range said over the phone is easy to forget and easy to dispute. The client remembers the low number, you remember the high one, and weeks later nobody can say what was agreed before the estimate went out.
Send a Ballpark emails your ballpark to the client as a link. The client opens a clean page in their browser, with no login, showing the range, the scope it's based on, and any notes or cost breakdown you choose to share. If the range works for them, they click Looks Good and the ballpark turns Approved in Structur.
That gives you a written yes on a range before you invest time in a detailed estimate.
š Understanding Sending Ballparks
ā” What It Does
Sending a ballpark allows you and your team to:
Email the ballpark to your client -- with your own message and a button to open the ballpark
Copy the ballpark link -- to share it yourself by text or from your own email
Show the client a branded page -- with your logo, the range, and the details you choose
Get a quick approval -- the client clicks Looks Good and the ballpark becomes Approved
Track where each ballpark stands -- Draft, Sent or Approved on the Ballparks list
š When to Use It
Sending a ballpark is most valuable when you want to:
Put a preliminary range in writing after a first call or site visit
Find out whether the client is comfortable with the range before you estimate
Give the client a simple page to review instead of a spreadsheet
Keep a record of which clients agreed to which range
š Step-by-Step Instructions
1. Check the Ballpark Before You Send
Open the ballpark and make sure the header shows Saved
Decide whether the client should see your Notes and Cost Breakdown with the Show to client switches
Click Preview to see exactly what the client will see
Note: The email goes to the client on the lead or project by default. Check their name and email before you send.
2. Send the Ballpark by Email
The Send Ballpark to Client window has three options:
Send via Email -- "Send a branded ballpark to your client"
Download PDF -- "Export a print-ready document"
The ballpark's share link, with a Copy button (see step 3)
The Send via Email form has Name, Email, Phone, Subject and Message, with Cancel and Send to Client at the bottom.
Click Send to Client
In the Send Ballpark to Client window, click Send via Email
Check the client's Name and Email (both required). They're filled in from the lead or project. Phone is optional. If the lead or project has no client, choose New Client and type the details in, or choose Existing Client and pick one from your client list.
Edit the Message
Click Send to Client
You see "Email sent to client" and the window closes. The ballpark's status changes to Sent, and it moves to the Sent tab on the Ballparks list. If your Leads board shows the Ballpark Sent stage, the lead moves into it.
Note: If EMAIL is off for Ballpark sent to client in Settings > Notifications > Ballparks, the Send via Email form shows a warning, "The client will not be emailed", and sending fails with a message that names the setting. Turning that switch off stops the email to your client, not just your own copy. Turn it back on and send again, or copy the link to share the ballpark yourself.
Note: Currently, the default message says "Please find the attached ballpark", but nothing is attached. The client opens the ballpark from a button in the email. Edit the message so it doesn't mention an attachment. The email also adds its own greeting, so you can delete the "Hi," line.
Note: Currently, the Subject you type isn't used. The client gets a subject like "Your Company: Ballpark #001 - Smith Kitchen Remodel".
3. Copy the Ballpark Link
The Send Ballpark to Client window also shows the ballpark's link with a Copy button. Click Copy to copy it, then paste it into a text or your own email.
Copying the link doesn't change the status. A ballpark that's still Draft shows its page without the Looks Good button, so the client can't approve it.
Note: If you want the client to be able to approve, send the ballpark by email first. After that, the same link shows Looks Good, so you can share it however you like.
4. What Your Client Receives
The client gets an email with your logo, the ballpark number, your message and a button to view the ballpark.
The button opens the ballpark page in the client's browser. They don't need an account. The page shows:
Your logo, the ballpark number and title
The BALLPARK RANGE, with a note that it's based on preliminary project scope and that final pricing comes from formal estimating
The date, square footage and project type
Your Notes and Cost Breakdown, if you turned on Show to client. The cost per square foot includes your markup.
A Looks Good button, and Download / Print
5. How Your Client Approves
When the range works for them, the client clicks Looks Good. They see "Response submitted!" and "Your contractor has been notified." The ballpark becomes Approved in Structur, and the button is gone the next time they open the link.
Note: Currently, no email or notification reaches your team when a client approves, even though the client is told you've been notified. Check the Approved tab on the Ballparks list, or the status on the ballpark, to see approvals.
6. After the Client Approves
An approved ballpark doesn't change the lead's stage and doesn't create anything in Estimates. When you're ready:
Move the lead to the right stage in your pipeline
Build the detailed estimate in Estimates
Send a proposal from that estimate for the client to sign
7. Edit a Ballpark After Sending
Sent and approved ballparks stay editable. When you click Save, the status stays the same and the client's link shows your changes straight away. There's no new version and no notice to the client.
Rate changes in Ballpark Settings also reach sent ballparks of that project type and their client links.
Important: Your client sees the current numbers every time they open the link, not the numbers you sent. If a client has already approved a range, don't change that ballpark. Create a new ballpark for a new scenario and send that instead.
ā Best Practices
Preview before every send -- it's the fastest way to catch a wrong square footage or a cost breakdown you meant to hide.
Rewrite the default message -- it mentions an attachment that isn't there, which leaves clients looking for a file.
Send it to yourself first -- send your first ballpark to your own email so you know exactly what clients get.
Hide the cost breakdown when the range is enough -- turn off Show to client on Cost Breakdown if you don't want clients comparing group prices.
Check the Approved tab regularly -- approvals don't send you a notification, so make it part of your weekly lead review.
Leave approved ballparks alone -- create a new ballpark for a changed scope, so the range the client approved stays on record.
ā Common Questions
Q: Does my client need a Structur account?
A: No. They open the ballpark from the button in the email or from the link you share.
Q: My client approved, but I didn't get a notification. Is something wrong?
A: No. Currently, Structur doesn't notify you when a client clicks Looks Good. The ballpark changes to Approved, so check the Approved tab on the Ballparks list.
Q: I copied the link, but my client says there's no button to approve.
A: A ballpark you haven't emailed is still Draft, and Draft ballparks don't show Looks Good. Send it with Send via Email first. The link then shows the button.
Q: I clicked Looks Good in Preview. Did that approve the ballpark?
A: No. Preview shows the button so you can see the client's page, but clicking it there does nothing. Only the client's click on a sent ballpark approves it.
Q: Why doesn't my client's email use the subject I typed?
A: Currently, the subject line is set by Structur, for example "Your Company: Ballpark #001 - Smith Kitchen Remodel". Put anything important in the Message instead.
Q: If I edit a sent ballpark, does the client see the change?
A: Yes, straight away, and the status doesn't change. The same goes for rate changes in Ballpark Settings. Create a new ballpark if you want to keep the original range.
Q: Sending fails, or the window says "The client will not be emailed". What do I do?
A: Go to Settings > Notifications > Ballparks and make sure EMAIL is on for Ballpark sent to client. With it off, the email to your client isn't sent. Turn it on, then click Send to Client again.
Q: Can I send a ballpark again after the client approves it?
A: Yes. An Approved ballpark still has Send to Client, so you can send it again by email or copy its link. Sending it again by email changes the status back to Sent, and the client sees Looks Good again.
Q: Can my client decline or ask for changes?
A: Currently, the client page only has Looks Good. If the client wants changes, they'll need to tell you directly. Adjust the ballpark or create a new one and send it again.
ā ļø Common Mistakes to Avoid
ā Don't | ā Do |
Send the default message as it is | Remove the "attached" wording and the extra "Hi," before sending |
Copy the link from a Draft and wait for an approval | Send by email first so the client sees Looks Good |
Wait for an approval notification | Check the Approved tab on the Ballparks list |
Edit a ballpark the client already approved | Create a new ballpark for the new scenario |
Turn off the Ballpark sent to client EMAIL to get fewer emails | Leave it on, because it also sends the email to your client |
Treat Looks Good as a signed agreement | Follow up with an estimate and a proposal the client signs |
