Skip to main content

Sales Rep Workflow

Covers a sales rep's jobs in order: the Leads board, adding leads, Embed Form leads, Intake, assigning the team, ballparks, follow-ups, proposal due dates, lost leads and handing off to an estimator.

Written by Support

šŸ“‹ Overview

A sales rep's day is a stream of small promises. Call the homeowner back Thursday. Send the rough number by Friday. Get the estimator out before the architect's deadline. When those promises live on sticky notes and in a personal inbox, the follow-up slips and a warm lead goes cold.

In Structur, a sales rep works almost entirely in the Leads pipeline. Every inquiry becomes a lead card, the first call is recorded in Intake, a quick price range goes out as a Ballpark, and follow-ups become Tasks on the lead. When the job is ready to price, you assign an estimator in Manage Members on the lead's Overview and the work moves on without anything being re-typed.

This guide lists those jobs in the order they usually happen and points to the article with the full steps for each.


šŸ” Understanding the Sales Rep Workflow

⚔ What It Does

The sales rep workflow allows you and your team to:

  • Log every inquiry as a lead, from the phone or from your website

  • Record the first call in the Intake form

  • Qualify the job fast with a ballpark the client can approve online

  • Keep follow-ups on the lead with tasks and email threads

  • Hand the lead to an estimator by assigning them in Manage Members

  • Close out leads that went elsewhere without losing their history

šŸ“… When to Use It

This workflow is most valuable when you want to:

  • Learn what a sales rep does in Structur in your first week

  • Make sure no inquiry falls through between calls

  • Give estimators everything they need before they start pricing

  • Review your pipeline with your manager each week


šŸ“ Step-by-Step Instructions

1. Work the Leads Board

Click Leads in the left sidebar. Use the scope dropdown to switch between All Leads, My Leads and Lost Leads, and switch between Board, List and Dashboard. The Dashboard shows Potential Revenue, Pending Proposals and a Proposal Due Dates calendar.

See Leads Pipeline.


2. Add New Leads

  • On the phone: click + New Lead at the bottom of a stage column, type a name and press Enter

  • With full details: click + New Lead at the top right and fill in Create New Lead, including the client under Client Info

  • From your website: leads from the Embed Form land in the stage set in Default Stage for New Leads

See Leads Pipeline and Website Embed Form.

Note: Put the client's name in the lead name, for example "Smith Kitchen Remodel". Cards and search use the lead name only.


3. Record the First Call in Intake

Open the lead and click Intake in the module bar (under Preconstruction). Answer the questions on project type, budget, timing, drawings, permits, financing, finishes and complexity, then lock the form to save your answers.

See Intake Form.

Note: Answers from your website form don't go into Intake.


4. Assign the Team on Overview

  1. Open the lead. On Overview, click Edit in Project Details

  2. Click Manage Members, set Sales Rep(s) and, when you know them, Estimator(s), Project Manager(s) and Superintendent(s), then click Save Changes

  3. Fill in the Proposal Due Date and Confidence

  4. Click Save Changes

See Leads Pipeline.

Note: Depending on their role, teammates may only see the leads they're assigned to in Manage Members. Assign people as soon as you know who's working the job.


5. Send a Ballpark

Click Ballparks in the module bar to build a quick price range from your company's price per square foot, then send it. The client opens it in their browser and clicks Looks Good if the range works for them, and the ballpark turns Approved.

See Ballparks and Send a Ballpark.

Note: Sending a ballpark moves the lead to the Ballpark Sent stage, if that stage is visible on your Leads board and the lead isn't already further along. To use it, turn Ballpark Sent on in Settings on the Leads page. See Pipeline Stages.


6. Keep Follow-Ups on the Lead

  • Create a Task on the lead for each call-back, with a due date. See Create and Manage Tasks

  • If your company has connected its mailbox, read and send client emails from Emails on the lead. See Emails


7. Hand the Lead to an Estimator

Make sure Estimator(s) is set in Manage Members, the Intake is complete, and any files from the client are in Files. When the estimator creates the first estimate, the lead moves to Estimating automatically, and when the proposal is sent it moves to Proposal Sent.

See Pipeline Stages and Estimator Workflow.


8. Mark a Lead as Lost or Re-Open It

  1. Open the lead and click Actions in the header, then Mark Lead as Lost

  2. Click Mark as Lost

To bring it back, pick Lost Leads in the scope dropdown, open the lead and click Re-Open Lead. It returns to the stage it was in.

See Leads Pipeline.


⭐ Best Practices

  • Log the lead during the call -- quick add needs only a name, so nothing waits until you're back at your desk.

  • Put the client's name in the lead name -- cards and search use the lead name only.

  • Assign the estimator early -- an unassigned lead is easy to forget, and some roles only see leads they're assigned to.

  • Set a Proposal Due Date on every lead you're pricing -- it shows on the card and on the Dashboard calendar.

  • Write the reason before marking a lead lost -- there's no reason field, so add it to the lead's Description (click Edit in Project Details).

  • Mark lost instead of deleting -- a lost lead keeps its history and can be re-opened.


ā“ Common Questions

Q: Where do website leads show up?

A: In the Leads pipeline, in the stage set in Default Stage for New Leads in the Embed Form settings. See Website Embed Form.


Q: What's the difference between a ballpark and an estimate?

A: A ballpark is a quick range from your price per square foot, for checking the client's budget early. An estimate is the detailed price built from cost codes, and it becomes the proposal. See Ballparks and Estimates.


Q: What's the difference between Qualified Out and a lost lead?

A: Qualified Out is an ordinary stage, and the lead stays on the Board. A lead is lost only when you click Mark Lead as Lost. It then leaves the Board and shows under Lost Leads.


Q: Why can't my teammate see my lead?

A: If their role has View Only or Collaborate on Leads Pipeline, they only see leads they're assigned to in Manage Members. Add them to a team field, or ask your admin to check Settings > Permissions. See Roles and Permissions.


Q: Will I be notified when a lead changes stage?

A: No. The Leads group in Settings > Notifications has one event, New lead from embed form. Check the Board, or Recent Activity on the lead.


āš ļø Common Mistakes to Avoid

āŒ Don't

āœ… Do

Wait until the end of the day to add leads

Quick add the lead while you're on the call

Leave Estimator(s) empty when you hand off

Assign the estimator in Manage Members

Delete a lead that went elsewhere

Mark it lost

Hide the Ballpark Sent stage and expect sent ballparks to show on the board

Turn Ballpark Sent on in the Leads Settings

Did this answer your question?