Skip to main content

Invoices and Pay Apps

Covers the Invoices list, the three invoice types, simple invoices, pay applications and the schedule of values, retainage, Columns and Layout, sending or marking as sent, recording payments, editing, voiding and deleting.

Written by Support

📋 Overview

Getting paid shouldn't depend on someone rebuilding the numbers in a spreadsheet every month. When a draw goes out with the wrong percent complete, or a change order is left off, the client pushes back and the check slips another two weeks.

Invoices is where you bill your client from the numbers already in the project. A simple invoice bills a share of the contract. A pay application bills line by line against the schedule of values, with change orders and retainage built in. A cost-plus invoice bills your actual costs. You send it from Structur, or mark it as sent, and record each payment as it comes in.


🔍 Understanding Invoices

⚡ What It Does

Invoices allows you and your team to:

  • Bill a share of the contract -- with a Simple Invoice, by percent or amount

  • Bill progress line by line -- with a Pay Application against the schedule of values

  • Bill actual costs -- with a Cost-plus Invoice (see Cost Plus Projects)

  • Hold and release retainage -- per line on a pay application

  • Send it to your client -- by email, on a schedule, or marked as sent

  • Record payments -- full or partial

📅 When to Use It

Invoices is most valuable when you need to:

  • Send a deposit or progress bill in a couple of minutes

  • Send an AIA-style draw that ties back to your contract and change orders

  • See what's been billed, what's been paid and what's overdue


📝 Step-by-Step Instructions

1. Open Invoices

  1. Open the project

  2. Click Invoices in the module bar along the top (under Financial Management)

Export and New Invoice are at the top.

  • Cards: Draft, Awaiting Payment (with how many are partially paid), Overdue (what's still owed) and Paid

  • Tabs: All, Draft, Awaiting Payment, Overdue, Partially Paid, Paid and Voided

  • Columns: Number, Client, Title, Type, Total (with a paid bar), Balance Due, Due Date, Days Overdue, Status, Client Visibility and Created

Click Open on a row to open an invoice. A Draft invoice's row menu has Edit and Delete. A sent invoice your client can see has Edit and Unshare from client.


2. Choose the Invoice Type

  1. Click New Invoice

  2. Pick one:

    • Simple Invoice -- "Lump-sum invoice with a flat total."

    • Pay Application -- "AIA-style draw request against the schedule of values."

    • Cost-plus Invoice -- "Bill actual costs: expenses, commitments, and labor."

  3. Click Create Invoice

  4. Fill in the next window and click Create Invoice again

For a simple invoice the window asks for the Title, Number, Amount (in $ or %), Invoice Date and Due Date. For a pay application or cost-plus invoice it asks for the Title, Number, Application period ("Billing window covered by this draw"), Invoice Date and Due Date. Both show Previously invoiced: what's already been billed on the project, in dollars and percent. Draft invoices don't count toward it.

The invoice opens as a Draft. Invoice numbers are plain numbers, like 2118.


3. Fill In a Simple Invoice

  1. Enter the Title, check the Invoice date and pick the Due date

  2. Enter the Total Amount, or a Current % of the contract. One fills in the other.

  3. Check Previously Invoiced $ and Previously Invoiced %

  4. Check the Client, From Contractor, To Owner and Additional recipients. To Owner starts with your client's name, the project address and their email. If you've added your Contractor License # in Settings > Company, it shows as "License #..." in the From Contractor box.

  5. Add Notes, and turn on Send ACH info with invoice to print your bank details on the PDF

The percent is of the contract to date at its sale price, with approved change orders included. Example: on a $4,628.75 contract, 5% is $231.44.


4. Fill In a Pay Application

  1. Enter the Title, check the Application period and pick the Due date

  2. Check the Client and addresses

  3. Under Schedule of Values, enter the Amount Due or % on each line for this period. Add Materials Stored if you're billing for them.

  4. Enter a retainage percent in Work % and Materials %, and a Released amount to pay out retainage you've held

  5. Check the total line: Amount Due + Materials Stored - Retainage + Released = Billed this invoice

The schedule of values groups lines under PROPOSALS and CHANGE ORDERS, with Total Amount, Previously Invoiced, Held and Balance to Finish on each.

Previously Invoiced is filled in for you and can't be typed over. It counts every earlier invoice that's been sent, including simple invoices and deposits, spread across the lines.

Amount Due can't go past what's left on a line. If you type more, it stops at the balance and you'll see "Amount Due is limited to the $529.00 left to bill" (with that line's amount). Example: a 10% Work % on $529.00 holds $52.90, so the invoice bills $476.10.

The buttons above the table work on the lines you tick:

  • Apply Due % -- sets Amount Due to a percent of what's left to bill on each line

  • Apply Retainage % and Release Retainage % -- hold back or pay out retainage

  • Bill Remaining -- bills what's left on each line

  • Reset Amounts -- clears this period's amounts

  • Fullscreen -- more room to work

The Summary fills in the AIA lines for you, from 1. Original Contract Amount to 9. Balance to Finish, Including Retainage, with a Change Order Summary underneath. The Contractor's Statement and Architect's Certificate follow.

Note: If a line is marked Over-billed (billed past its total once earlier invoices are counted), the invoice can't be sent until you lower that line's amount.


5. Choose Columns and Layout

Click Columns above the schedule of values.

  • Columns -- turn any of the nine columns on or off. Columns you hide leave the client document.

  • Layout:

    • Show Groups Only -- one line per group, with its total

    • Show Cost Code and Show Line Item Description

    • Show Approved Changes -- adds Approved Changes and Revised Total columns, and change order lines join the proposal lines they revise

    • Separate Overhead, Separate Profit and Separate Taxes -- adds an editable amount-due row for each under every proposal and change order, and the lines show without them

    • Lump Sum -- bills the whole schedule of values as a single line

Click Visibility in the header to choose which sections print: Summary, Change Order Summary, Contractor's Statement, Architect's Certificate, Schedule of Values, Subtotal, % Remaining and $ Remaining. Turn on Apply to all new pay applications to make your choice the default, then click Save. See Overhead and Profit for when to separate overhead and profit.


6. Send It or Mark It as Sent

  1. Click Submit

  2. In Send to Client, keep Email the client on, and check the Subject, Additional recipients and Message. The Subject is filled in with your company name, invoice number and title, for example "Your Company: Invoice #2118 - Progress Draw".

  3. Under Send time, choose Send now or Schedule

  4. Under Reminder, choose whether to Send a follow-up email

  5. Click Send to Client

The PDF is attached automatically. You'll see "Invoice sent to client" and the invoice moves to Awaiting Payment.

To record an invoice you delivered another way, turn Email the client off. The window says "The client will not be emailed. The invoice will be marked as sent." Click Mark as Sent. It moves to Awaiting Payment with no email.

Save Only saves the email without sending it. A Draft invoice moves to Awaiting Payment, and your client isn't emailed.

A sent invoice's header has Mark as Paid, Void, Edit, Copy Link, Download, Preview, Open Budget and Resubmit.

Note: Pay applications and cost-plus invoices go out in the order they were created. If an earlier one is still a Draft, you'll see "Send the earlier application first". Send or delete the earlier one, then send this one.


7. What Your Client Sees

The email links to the invoice page. Copy Link in the header gives you the same link. The page shows who it's to and from, the project, the Due date, the amount due, and for a pay application the summary and schedule of values. Unless you take payments online, the page says "No online payment method is enabled for this invoice".


8. Record a Payment

  1. Click Mark as Paid

  2. In Record New Payment, check the Title and Payment date

  3. Enter the Amount. The window tells you whether it settles the invoice in full or leaves it Partially Paid.

  4. Pick the Payment method (ACH, Credit Card, Check, Cash, Wire Transfer, QuickBooks Online Payment or Other), the Deposit to account, and add a Reference / memo

  5. Click Record Payment

Payments Received on the invoice lists each payment and the Outstanding balance. Example: $100.00 on a $231.44 invoice leaves $131.44 and the invoice shows Partially Paid. Use New Payment there to record the next one.


9. Edit a Sent Invoice

Click Edit. You'll see "Moved back to Draft" and the invoice can be changed. Payments already recorded stay on it. Click Submit again when you're done.


10. Void an Invoice

  1. Click Void on the invoice

  2. Void this invoice? says the invoice "becomes Voided. Its payments are voided with it and stop counting as received." Click Void.

The invoice shows Voided, its payments show Voided, and the header keeps only Copy Link, Download, Preview and Open Budget.

Note: You can't void a pay application or cost-plus invoice that a later sent one already counts in its previous figures. You'll see "Cannot void this application... Reopen or void the later application first." Void or edit the later one first.


11. Delete a Draft Invoice

  1. On the Invoices list, open a Draft invoice's row menu and choose Delete

  2. Delete Invoice asks if you're sure. Click Delete.

You'll see "The invoice is deleted successfully." Only Draft invoices can be deleted. Void a sent invoice instead.


12. Files, Internal Notes and Activity

Below Payments Received, every invoice has three more sections:

  • Files -- drop files on the box or click browse. PDF, PNG, JPG and XLSX files up to 25 MB.

  • Internal Notes -- a "Team-only thread for this invoice. Never shared with the client." Type @ to mention a teammate.

  • Activity -- "A running log of changes to this invoice": who created and sent it, schedule of values changes (for example Amount due from $0.00 to $661.25), payments recorded and "Email delivered".


⭐ Best Practices

  • Bill from the project, not a spreadsheet -- the numbers come from your proposal and change orders.

  • Use a pay application for draws -- it carries change orders and retainage for you.

  • Send draws in order -- a Draft pay app left behind blocks the next one.

  • Record every payment when it lands -- Balance Due and Overdue stay true.

  • Use Mark as Sent for invoices you deliver yourself -- so the status is right without a second email.


❓ Common Questions

Q: Why can't I type a bigger Amount Due on a line?

A: A line can't bill more than what's left on it. Previously Invoiced already counts what you've billed.


Q: Why can't I send my pay application?

A: An earlier pay application or cost-plus invoice is still a Draft. Send or delete it first.


Q: Why can't I mark my invoice as paid?

A: Mark as Paid shows once the invoice has been sent, marked as sent or saved with Save Only. A Draft invoice doesn't have it. Click Submit, then Send to Client, Mark as Sent or Save Only.


Q: Why can't I void an invoice?

A: A later pay application or cost-plus invoice that's been sent already counts it. Void or edit the later one first.


Q: How do I record a partial payment?

A: Click Mark as Paid and enter the amount received. The invoice shows Partially Paid until the rest comes in.


Q: Where do change orders go on a pay application?

A: Approved client change orders have their own section under CHANGE ORDERS, and show in the Change Order Summary. Turn on Show Approved Changes to show them against the proposal lines instead.


⚠️ Common Mistakes to Avoid

❌ Don't

✅ Do

Rebuild the draw in a spreadsheet

Bill it as a pay application

Leave an old pay app in Draft

Send or delete it so the next one can go

Forget retainage until the end

Set Work % on each pay application

Leave payments unrecorded

Record them with Mark as Paid

Delete a sent invoice to undo it

Void it, or Edit it back to Draft

Did this answer your question?