Skip to main content

Meetings

Covers creating a project meeting, building and sending the agenda, attendee suggestions, taking minutes, tasks and decisions, sending minutes for approval, toolbox talks, templates, settings and what your client sees.

Written by Support

📋 Overview

The owner swears the tile decision was made three weeks ago. Your superintendent remembers it differently. The architect never saw the minutes, the action item about the flashing detail had no name on it, and the same open question comes up at every OAC meeting because nobody carried it forward. Meetings cost real time on a job, and most of that time is wasted when what was decided isn't written down, sent out and followed up.

Meetings runs a project's meetings from agenda to approved minutes. You pick a meeting type, build the agenda, send it to the attendees, take minutes as you go, turn items into tasks and send the minutes out. Items still open when the minutes go out carry into the next meeting in the series, with their history, so nothing discussed gets lost between meetings.

A project manager might run a weekly OAC meeting that the client reads in their portal. A superintendent might only need a ten-minute toolbox talk with signatures from the crew. Both live in the same place on the project.


🔍 Understanding Meetings

⚡ What It Does

Meetings allows you and your team to:

  • Create meetings from a type or your own template -- OAC Meeting, Foreman / Superintendent, Pre-installation, Preconstruction Kickoff, Subcontractor Coordination, Closeout, Toolbox Talk or Custom

  • Build an agenda in sections with items, owners, due dates, notes and attached files

  • Pull open project records onto the agenda with smart sections for open RFIs, open submittals, pending change orders, pending selections and the schedule look-ahead

  • Send the agenda as a PDF with a calendar invite, and let attendees suggest items from their own link

  • Take minutes as you go, mark attendance, flag decisions and turn items into Tasks

  • Send the minutes and ask each recipient to approve them, request edits or comment, with no login needed

  • Carry open items forward to the next meeting in a repeating series

  • Run toolbox talks with crew sign-in and on-screen signatures

  • Share minutes with your client in the client portal

  • Keep a team-only thread on each meeting in Internal Notes

📅 When to Use It

Meetings is most valuable when you want to:

  • Run a weekly OAC or foreman meeting without rebuilding the agenda each time

  • Get an owner or architect to sign off on what was decided

  • Make sure every action item has an owner and lands on someone's task list

  • See every open item and every decision on a project in one list

  • Keep signed toolbox talk sheets with the project


📝 Step-by-Step Instructions

1. Open Meetings

  1. Click Projects in the left sidebar and open the project

  2. Click Meetings in the module bar along the top (under Project Management)

The page shows four cards, Upcoming, Minutes Due, Minutes Draft and Minutes Sent, and the same groups as filters above the list, plus All and Cancelled. Use Search meetings... to find a meeting, and List or Grid to change the view. The buttons at the top are Export, Open Items, Decisions, Manage Templates, Settings and New Meeting. Export offers Export PDF and Export CSV. Inside a meeting, the buttons at the top are Copy Link, Download, Preview and Save as Template.

Note: On a narrower window, these buttons fold into an Actions menu next to New Meeting.

Note: Who can use Meetings is set on the Meetings row in Settings > Permissions. View Only can see meetings and suggest agenda items. Collaborate can create, edit, send and run meetings. Full Access can also delete meetings, end a series, and manage templates and settings. What other roles can see and do depends on their permissions in Settings > Permissions.


2. Create a Meeting

  1. Click New Meeting. The Create New Meeting window opens

  2. Pick a meeting type, or one of your company's templates. Types tagged Smart agenda come with sections that fill themselves from the project

  3. Enter the Title and Date (both required), and check the Start time and End time

  4. Add a Location and a Meeting link if you have them. The link field takes a Zoom, Teams or Google Meet link

  5. Choose how often it Repeats: Does not repeat, Weekly, Every 2 weeks or Monthly

  6. Check the Attendees. The project team and the client are added for you. Click the field to add teammates, vendors or anyone by email address

  7. Set the options below (see the list that follows)

  8. Click Create Meeting

The meeting opens with the status Scheduled and a number, such as #0001.

The options at the bottom of the window are:

  • Google Meet -- creates a Google Calendar event with a Meet link from your Google account, and Google sends the invites. The first time, click Connect Google Calendar under the switch to connect your calendar (see Integrations). If you have more than one Google calendar, choose which one under Calendar. Only the person who created the meeting can change this, because the invite comes from their calendar

  • Ask attendees to approve the minutes -- each recipient gets a link to approve, request edits or comment, with no login needed

  • Let attendees suggest agenda items -- each attendee gets a link in the agenda email to suggest topics until the meeting starts. You review them first

  • Private meeting -- only attendees, you and company admins can see it. A private meeting is never shown in the client portal

  • Share with client -- the client sees the minutes in the portal once they are sent. They don't see the meeting before that, and they never see your internal notes

Note: Repeats can't be changed after the meeting is created. Pick it carefully, or use End Series later to stop a series (step 12).

Note: Meeting numbers count within each series. A weekly OAC series runs #0001, #0002, #0003, and a separate meeting on the same project starts again at #0001.

Note: On the Free plan, creating a meeting uses 10 credits. Meetings that a repeating series creates for you don't use credits.


3. Build the Agenda

The Agenda card lists the meeting's sections. An OAC Meeting starts with Previous Minutes, Safety, Look-ahead, Open RFIs, Open Submittals, Pending CO's, Pending Selections, Inspections and Quality, and New Business.

  1. Click New Item under a section, type the item title and press Enter. The field stays open so you can keep adding items

  2. On each item, choose an Owner from the attendees, set a Due date, and leave the status on Open or change it to On Hold or Closed

  3. Click the arrow on an item to expand it. Add Notes for the agenda or click Attach File. Files can be up to 25 MB each

  4. Click New Section to add a section. Use the three-dot menu on a section to Rename, Move up, Move down or Remove section

  5. Fill in the Overview under General Details if you want a short purpose line at the top of the agenda and minutes

Sections tagged Smart fill themselves with what's open on the project, and each has a Refresh button to pull the latest records. A smart section with nothing to show reads "Nothing open on the project right now."

Note: To take an item off the meeting, click the X on its row ("Remove item from this meeting").


4. Send the Agenda

  1. Click Preview to check the agenda as attendees will see it

  2. Click Send Agenda

  3. Check the Recipients, and add anyone else by email address

  4. Edit the Subject and Message if you like

  5. Click Send Agenda

Each recipient gets the agenda as a PDF with a calendar invite. The status changes to Agenda Sent, the button becomes Resend Agenda, and the Delivery card shows each recipient with the time it was sent and delivered.

Note: If you change the agenda after sending it, the Suggestions card reminds you: "The agenda changed after it was sent". Click Resend Agenda so everyone has the latest version.


5. Review Attendee Suggestions

With Let attendees suggest agenda items on, each attendee's agenda email has their own link. They open it, with no login, click Suggest an Item, and send a topic with optional details and an attachment. They can see on the same page what happened to each suggestion.

Once the agenda is sent, a Suggestions card appears above the agenda. For each suggestion, choose one:

  • Add to Agenda -- makes it a new item, tagged "Suggested by" with the person's name. Pick the section and click Add to Agenda

  • Add to Item -- adds it to the notes of an item that's already on the agenda

  • Decline -- keeps it off the agenda. You can give a reason, and the person sees it on their page

Nothing goes on the agenda until you add it. Suggestions close when the meeting starts.

Note: If an attendee lost their email, click Attendee Links on the Suggestions card and use Copy Link to send them their link again.


6. Run the Meeting and Take Minutes

  1. Click Start Meeting. You see "Meeting started. Take the minutes as you go." The status shows Live with a running timer, and the Agenda card becomes Minutes

  2. On each item, type what was discussed in the notes box, and update the Owner, Due date and status

  3. Click the target icon on an item to Flag as decision. The item gets a Decision tag

  4. Under Attendees, mark each person Present, Remote, Absent or Distribution only

  5. To turn items into tasks, click Select Items, tick the items, and click Create Task. Each task takes the item's owner and due date

  6. Click End Meeting when you're done. You see "Meeting ended. Review the minutes, then send them." and the status changes to Minutes Draft

Tasks show in the meeting's Tasks card. A task assigned to a teammate goes on their Tasks list and is tagged On Their List. You can also add a task that isn't tied to an item with New Task.

Note: If the meeting date has already passed, the button reads Start Minutes instead of Start Meeting, and the meeting shows as Minutes Due in the list until the minutes are sent.

Note: Started the minutes by mistake? Click Back to Agenda. The notes and attendance you've taken are kept.


7. Send the Minutes and Get Them Approved

  1. Click Send Minutes

  2. Check the Recipients, Subject and Message

  3. Click Send Minutes

Each recipient gets the minutes as a PDF. The status changes to Minutes Sent. For a repeating meeting, the next meeting is created right away with the open items carried forward.

If Ask attendees to approve the minutes is on, each attendee also gets a link to a review page, with no login needed, where they click Approve Minutes, Request Edits or Comment. Their answers show in the Minutes Approval card and under the status, for example "0 of 1 approved" or "Edits requested (1)", with the text of any request.

To fix the minutes after someone requests edits, make the change on the meeting and click Resend Minutes. The resent minutes are marked "Revised" with the date, and recipients can respond again.

Important: Once the minutes are sent, the meeting can't be cancelled or deleted, and only a company admin or the meeting's author can edit it. Check the minutes with Preview before you send.

Note: People you add in the send window who aren't attendees get the PDF only. They don't get a link to approve.


8. Follow Open Items and Decisions

When the minutes go out on a repeating meeting, every item that's still Open or On Hold moves to the next meeting, tagged "Carried from" with the meeting number. Expand a carried item to see the note from each earlier meeting. Tasks that aren't done and the attendee list carry over too. Closed items stay behind.

On the Meetings list:

  • Click Open Items to see open and on-hold agenda items across every meeting series in the project, with the owner and the meeting each one has been open since

  • Click Decisions to see every item flagged as a decision, with the meeting it was made in

Click Open on any row to jump to the meeting.


9. Run a Toolbox Talk

  1. Click New Meeting and pick Toolbox Talk

  2. Choose a Topic from the built-in safety library, or pick Write my own topic. The talking points show below the topic

  3. Choose the Presenter, check the date and Repeats, and click Create Meeting

  4. On site, click Start Sign-in

  5. Under Sign-in, add each crew member by picking a teammate or vendor contact, or by typing a name

  6. Hand the device to each person and click Sign on their row. They sign with a finger or the mouse and click Sign

  7. Click Sign as Presenter and sign

  8. Note any hazards the crew raised under Notes and Follow-ups

  9. Click Complete. You see "Toolbox talk completed" and the signatures are locked

  10. Click Send Sign-in Sheet to email the signed sheet as a PDF

Note: Crew members often have no email address on file. If the send window reads "No attendee has an email address. Add who should get it.", type the address of whoever keeps your signed sheets. To copy the same person every time, add them under Always Copy on Toolbox Sign-in Sheets in Settings (step 10).

Note: The presenter and at least one crew member must sign before you can click Complete.


10. Use Templates and Settings

Templates save an agenda's sections so new meetings can start from them. Templates are shared across every project in your company.

  1. On a meeting, click Save as Template, give it a Name and click Save Template. Only the sections are saved, not the items

  2. Or on the Meetings list, click Manage Templates, then New Template. Enter the Template name, choose the Meeting type, add your sections and click Create Template

  3. In Manage Templates, use the icons on a template to edit, duplicate or delete it

Your templates show in the Create New Meeting window right after Custom, tagged Your template.

Settings holds the defaults for new meetings.

  1. On the Meetings list, click Settings. The Meetings Settings panel opens on the right

  2. Under Apply these defaults to, choose All Projects or This Project

  3. Set the Start time, Length and Location for new meetings

  4. Turn the defaults on or off: Add the Project Team and Client, Ask Attendees to Approve the Minutes, Let Attendees Suggest Agenda Items and Share With the Client

  5. Under Who gets copied by default, add the email addresses that should get every agenda and minutes email, and every toolbox sign-in sheet

  6. Click Save Changes

Note: Settings only fill in new meetings. Anything can still be changed on the meeting itself, and meetings that already exist aren't changed.

Note: Manage Templates and Settings need Full Access to Meetings.


11. What Your Client Sees

With Share with client on, the meeting shows on the Meetings tab of the client portal once the minutes are sent. The list shows the Meeting, Project, Type, Date, Time and Location, and when the minutes were sent, for example "Minutes revised 11/17/2026 1:36 AM" after a resend.

The client clicks View Minutes to open the minutes as you sent them: the attendees and attendance, each item with its owner, status and notes, the decisions, and the list of tasks from the meeting.

The client never sees a meeting before its minutes are sent, a private meeting, a cancelled meeting, Internal Notes or the Delivery list.

Note: The minutes include the meeting's task list, with each task's assignee. Keep anything you don't want the client to read in Internal Notes, not in the item notes or task titles.

Note: Share with client starts on for OAC Meeting and Closeout only. Turn it on yourself for any other meeting you want the client to read.


12. Cancel, Delete or End a Series

  • Cancel Meeting -- on the meeting, or in the three-dot menu on its row. The meeting stays on the list as Cancelled, and its open items move to the next meeting in the series

  • Delete -- in the three-dot menu on the meeting's row. A repeating series skips that date and carries on

  • End Series -- next to Repeats on any meeting in the series. No new meetings are created, and meetings already created stay as they are

Important: Deleting a meeting removes it and its agenda for good. A meeting whose minutes have been sent can't be cancelled or deleted, so it stays on the project as the record of what was agreed.


⭐ Best Practices

  • Start from a type with a Smart agenda -- the open RFIs, submittals, change orders and selections are already on the agenda, so you aren't copying them in by hand before every OAC meeting.

  • Give every item an owner and a due date -- Create Task uses them, and an item with no owner is the one that comes back unanswered next week.

  • Send the agenda a day or two ahead -- attendees can only suggest items until the meeting starts, and a late agenda means the suggestions arrive in the room instead.

  • Flag decisions as they're made -- the Decisions list is only as good as what you flag, and it's what you'll reach for when someone disputes what was agreed.

  • Close items when they're done -- every Open and On Hold item carries forward, so stale items pile up on next week's agenda if nobody closes them.

  • Turn on approval for client-facing meetings -- a recorded "approved" from the owner settles arguments that a sent email can't.

  • Preview before you send the minutes -- once they're sent, the meeting can't be deleted, and only the author or a company admin can change them.


❓ Common Questions

Q: What's the difference between Meetings and Leadership Meetings?

A: Meetings is on each project, for meetings about that job: OAC, foreman, pre-installation, toolbox talks and the like. Leadership Meetings is in Company Operations, for running your own company. They're separate, and items don't move between them.


Q: Do attendees need a Structur login?

A: No. Clients, architects, vendors and anyone else you add by email get the agenda and minutes as a PDF. Their links to suggest agenda items and to approve the minutes open without a login.


Q: Why can't I delete or cancel a meeting?

A: Its minutes have been sent. Sent minutes are the record of the meeting, so the meeting stays. Currently, there's no way to remove a meeting once its minutes are out. If the minutes are wrong, correct them and click Resend Minutes. Recipients see them marked as revised.


Q: Can I change how often a meeting repeats?

A: Currently, Repeats can't be changed after the meeting is created. Click End Series on the meeting to stop the series, then create a new meeting with the right setting. Open items don't move across to the new series, so add them again.


Q: When is the next meeting in a series created?

A: When you send the minutes, or when you cancel the meeting. If the next date arrives and the last meeting's minutes still haven't been sent, the next meeting is created when someone opens the project's Meetings list.


Q: Who gets notified when an attendee approves or asks for edits?

A: The person who created the meeting. You can turn each alert on or off in the Meetings section of Settings > Notifications.


Q: Does every attendee have to approve before the minutes count?

A: No. Approval is a record, not a gate. The Minutes Approval card shows who has approved, who requested edits and who hasn't answered, and you decide what to do about it.


Q: Why doesn't my client see a meeting in their portal?

A: Check three things on the meeting: Share with client is on, Private meeting is off, and the minutes have been sent. The client never sees a meeting before its minutes go out.


Q: Can I use Google Meet?

A: Yes. Turn on Google Meet when you create the meeting. Structur creates a Google Calendar event with a Meet link from your Google account, and Google sends the invites. The first time, click Connect Google Calendar. You can also paste a Zoom, Teams or Google Meet link into Meeting link.


⚠️ Common Mistakes to Avoid

❌ Don't

✅ Do

Send the minutes before reading them through

Click Preview first, because a meeting with sent minutes can't be deleted

Leave finished items on Open

Set them to Closed so they don't carry into the next meeting

Write action items with no owner

Choose an Owner and a Due date, then use Create Task

Pick the wrong Repeats setting and try to change it later

Check Repeats before you click Create Meeting, or use End Series and start a new one

Assume the client can see the agenda

Send the minutes: the client portal only shows a shared meeting after that

Turn on Private meeting for a meeting the client should read

Leave it off, because private meetings are never shown in the client portal

Delete a meeting to stop a weekly series

Click End Series, which stops new meetings and keeps the ones you've held

Did this answer your question?