š Overview
Not every hour gets clocked. A crew member without a login. A foreman who forgot to start the timer. A week of shifts handed to the office on a paper card. If that time never makes it into your system, your labor costs are wrong and your budget looks healthier than it is.
New Entry on the Timesheets page lets you add time by hand. The Daily tab records one shift on any date. The Weekly tab fills in a whole Monday-to-Sunday week for one person. The Crew tab enters hours for several people across a week in one grid.
This article walks through all three tabs.
š Understanding Manual Time Entries
ā” What It Does
New Entry allows you and your team to:
Add a single shift on any date with the Daily tab
Record breaks on every entry, with as many breaks as you need
Fill in a week for one person with the Weekly tab, including past weeks
Enter a whole crew's hours at once with the Crew tab
Split a day across cost codes by adding more than one line for the same day
Log overnight shifts that run past midnight
š When to Use It
New Entry is most valuable when you need to:
Enter time for crew members who don't clock in themselves
Add a shift someone forgot to clock
Catch up on a past day or week
Split a day between two parts of the job
š Step-by-Step Instructions
1. Open New Entry
Open the lead or project the time belongs to
Click Timesheets in the module bar along the top (under Project Management)
Click New Entry
The Create New Time Entry window opens on the Daily tab. Click Weekly or Crew to switch.
Note: You can also click New Entry on the All Leads / Projects view. The window then starts with a Lead/Project field, so pick the job first.
2. Add a Daily Entry
Choose the Team Member the time is for
Check the Hourly Rate. The line under it shows the person's rate from their profile. Leave the field blank to use that rate, or type a different rate for this entry
Set the Date, Clock In and Clock Out
Pick a Cost Code (optional)
To add a break, click Breaks, then Add break, and enter the Start and End. Click Add break again for another
Click Create Time Entry
The line above the buttons reads "By creating this entry I confirm the times are accurate and complete." After you create it, you'll see "Time entry created".
When you open a manual entry later in Edit Timesheet Entry, it shows "Manual, no location" under Clock In and Clock Out, because no location is recorded for time added by hand.
Note: For a shift that runs past midnight, enter a Clock Out earlier than the Clock In, for example 10:00 PM to 02:00 AM. Structur treats it as one overnight shift.
3. Fill In a Week for One Person
Click the Weekly tab
Choose the Team Member and check the Hourly Rate
Check the week at the top, for example "Nov 9 - Nov 15, 2026". Use the arrows on either side to move to another week
On each day the person worked, click + Add entry
A line appears under that day, starting at 08:00 AM to 05:00 PM. Change the times to match the shift
Pick a cost code for the line (optional), and click Breaks on the line to add a break
Click Create Time Entries
The footer adds it up as you go, for example "Total 9.5 h Ā· 2 entries". After you create them, you'll see a message like "2 time entries created". Each line becomes its own entry.
To remove a line before you create it, click the trash icon at the end of the line.
4. Split a Day Across Cost Codes
On the Weekly tab, a day can have more than one line.
Fill in the first line and pick its cost code
Click + Add entry on the same day again
The new line starts where the first one ends, for one hour. Adjust its times
Pick the second cost code
Click Create Time Entries when the week is done
On the Daily tab, each entry takes one cost code. To split a day there, add a separate Daily entry for each code.
5. Enter a Whole Crew's Week
Click the Crew tab
Check the week at the top, and use the arrows to move to another week if needed
On the first row, pick the Team Member and a Cost Code (optional)
Click a day's cell and type the Hours. The cell shows Clock In (starting at 08:00 AM) and fills in Clock Out for you. Change the Clock In if the shift started at another time, and click Add break to add a break
Repeat for each day that person worked
Click + Add Team Member for the next person, and fill in their row the same way
Click Create Time Entries
The Total column and row add up the hours, and the footer shows the count, for example "1 team member Ā· 2 rows Ā· Total 8 h". Each filled-in day becomes its own entry. Rows you added but left empty are ignored.
Note: The Crew tab has no Hourly Rate field. Each person's entries use the rate from their profile. To use a different rate, change it on the entry afterwards with Edit, or use the Daily or Weekly tab.
ā Best Practices
Use the Crew tab for crews on the same job -- one grid for everyone is faster than a Weekly entry per person.
Check the week at the top before you start -- the Weekly and Crew tabs open on the current week, and the arrows take you to past weeks.
Add breaks as you enter the time -- every tab has a Breaks option, and the time total and labor cost are too high without them.
Pick a Budget cost code on every line -- lines with a code from outside the Budget, or no code, go to Uncategorized in the Budget.
Glance at the footer total before you create -- it's the quickest way to spot a missing day or a typo in the hours.
ā Common Questions
Q: Can I fill in a past week?
A: Yes. On the Weekly and Crew tabs, use the arrows next to the week at the top to move to the week you need. The Daily tab takes any date.
Q: Can I add breaks on the Weekly and Crew tabs?
A: Yes. On the Weekly tab, click Breaks on the line. On the Crew tab, click the day's cell and click Add break.
Q: What rate does an entry use?
A: On the Daily and Weekly tabs, a blank Hourly Rate uses the person's profile rate, and a rate you type applies to that entry. The Crew tab always uses each person's profile rate. See Track Labor Costs for where profile rates are set.
Q: Can I enter time for my crew?
A: Yes. Choose the person under Team Member on any tab, or use the Crew tab for several people at once. Crew members without a license seat appear in the list too.
Q: What's the difference between New Entry and Track Time?
A: Track Time is a live timer that logs time for you as you work. New Entry is for entering time by hand, for yourself or anyone on your team, after the fact. See Clock In and Out for the timer.
ā ļø Common Mistakes to Avoid
ā Don't | ā Do |
Enter last week's hours on this week's grid | Use the arrows to move to the right week first |
Leave breaks off the entry | Add them with Breaks before you create the entries |
Expect the Crew tab to take a custom rate | Use the Daily or Weekly tab, or edit the entry afterwards |
Put a whole split day on one cost code | Click + Add entry again and give each line its own code |
Skip the cost code | Pick the line from the Budget so labor lands where it belongs |
