Skip to main content

Emails

Connecting your company mailbox, which emails show on a lead or project, reading threads, sending and replying with attachments, Fetch Previous Emails, Archive, and the Home Email Activity widget.

Written by Support

šŸ“‹ Overview

The most important conversations on a job happen over email. The client approves a finish by replying to a thread. A schedule change gets agreed in a message to the project manager. A week later nobody can find it, because it's sitting in one person's inbox and the rest of the team never saw it.

Emails brings your client conversations into the lead or project they belong to. You connect your company's mailbox once in Settings > Integrations, and every lead and project shows the threads to and from its client's email address. Your team can read them, reply, and send new emails from inside Structur, and the messages go out through your connected mailbox.

Structur connects one mailbox for the whole company, so everyone who can open Emails on a project sees the same threads. That makes the client's email address on the project important. It decides exactly which emails appear.


šŸ” Understanding Emails

⚔ What It Does

Emails allows you and your team to:

  • Connect your company mailbox -- Google, Microsoft or another IMAP server, in Settings > Integrations

  • See client conversations on the job -- each lead and project shows the threads to or from its client's email address

  • Read whole threads in place -- click a thread to expand every message without leaving the page

  • Send a new email -- with a subject, formatted message, CC and attachments

  • Reply and Reply All -- inline, at the bottom of the thread

  • Track what's been read -- unread threads are bold with an orange dot, and you can mark them unread again

  • Pull in older emails -- with Fetch Previous Emails

  • Reply from your Home page -- with the Email Activity widget

šŸ“… When to Use It

Emails is most valuable when you want to:

  • Keep every client conversation with the job it's about

  • Let your team see what was agreed with a client without forwarding emails around

  • Reply to a client while you're already working in the project

  • Pick up a job from a colleague and read the full email history first

  • See recent client emails across your jobs from the Home page


šŸ“ Step-by-Step Instructions

1. Connect Your Company Mailbox

  1. Go to Settings > Integrations

  2. In the Email section, find your provider: Google Email, Microsoft Email or Other IMAP Server

  3. Click Connect on your provider's row

A connected row shows Connected in green, the mailbox address under the provider name, and a Disconnect button. Rows that aren't connected show Not connected in grey with Connect.

Note: One mailbox is connected for your whole company, not one per user. Every teammate sees the threads from that same mailbox.

Note: Changing Settings > Integrations needs Full Access to Integrations in Settings > Permissions. Users with View Only can see the page but can't connect anything. Email integration is included on the Pro and Enterprise plans.


2. Check the Client's Email Address

Emails shows every thread where the client's email address appears on any side of a message: as the sender, a recipient or a CC. Before you rely on Emails, open the lead or project and check that a client is selected in Project Details on Overview. To check their email address, click Edit, then Update details under Client.

If no client is selected, or nothing matches the client's address, Emails shows No emails found.

Important: Never use your own email address, or the connected mailbox's address, as a client's email. Every email in that mailbox has that address on it, so the project shows the whole company mailbox to everyone who has access to the project. Every other lead or project with that client email shows the same emails too. Use the client's real address.

Note: If the same client email is on several leads or projects, each one shows the same threads. Read and unread status is shared between them.


3. Open Emails

  1. Open the lead or project

  2. Click Emails in the module bar along the top (under Project Management)

Along the top right are Export, Fetch Previous Emails and + New Email (some sit under Actions on a narrower screen; + New Email stays on the row).

Each row is one thread. It shows the subject, the number of messages in brackets when there's more than one, such as "(3)", a short preview and the date. Unread threads are bold with an orange dot. The icons on each row are Reply, Reply All, Mark as Read or Mark as Unread, Archive, and a paperclip that's active when the thread has attachments.

Note: Currently, some previews show stray code or characters, such as "'" in place of an apostrophe, or text starting "@media only screen" on automated emails. Click the thread to read the full email.

Important: Archive removes the thread straight away, with no confirmation. It hides the thread from Structur only, on every lead and project with that client email. The email stays in your mailbox, and there's no way to bring the thread back in Structur. Only archive threads you're sure your team no longer needs to see.

Note: Emails works the same way on leads and on projects. All threads are in one list. There's no search, no filters, and no separate Sent, Unread or Archived view.


4. Read a Thread

Click a thread to expand it in place. The newest message is open at the bottom with its Date, From and To, and the full email underneath. Older messages show as collapsed rows with the sender's address, a preview and the date.

Opening a thread marks it as read. To flag it again, click the envelope icon (Mark as Unread) on the row.

Note: Dates and times show in your computer's time zone. If teammates are in different time zones, each sees their own local time.

Note: Read and unread status in Structur is tracked separately and may not match your mailbox.


5. Send a New Email

  1. Click + New Email

  2. Type the recipient's address in To

  3. To copy someone in, click Add CC and fill in CC

  4. Enter a Subject

  5. Write your Message. Click into the message to show the formatting toolbar.

  6. To attach a file, click the paperclip and choose a file from your computer. Click the paperclip again for each extra file

  7. Click Send Email

Each file you attach shows a message such as '"Site photos.pdf" attached' and is listed under Attachments with its size. Click the x next to a file to remove it.

You see Email sent successfully, and the new thread appears at the top of the list. A thread with attachments shows a paperclip on its row: click it to see the file names. When you expand the thread, the files are under Attachments. The email goes out through your connected mailbox, so it also shows in that mailbox.

Note: The To field isn't filled in for you and doesn't suggest contacts. Type the client's address yourself. An email only shows on a lead or project if it goes to (or comes from) that record's client email. If you send to another address, the thread shows on whichever lead or project has that address as its client email, or on none.

Note: Pressing Enter in the To field submits the form, as if you'd clicked Send Email. If the subject is still empty, you see "Please enter email subject". Click into the next field instead of pressing Enter.

Note: Currently, you attach files from your computer only, one file each time you click the paperclip. To send a document that's in the project's Files, download it first, then attach it.

Note: Currently, Structur doesn't add an email signature. Type your sign-off at the end of the message.

Important: Clicking Cancel closes the email and discards what you wrote, with no warning. Copy long messages somewhere safe before you cancel.


6. Reply to a Thread

  1. Click Reply on the thread's row, or Reply All to include everyone on the thread

  2. The reply opens at the bottom of the thread, with the sender under Reply To

  3. Click Add CC to copy anyone else in

  4. Write your Message, and attach a file with the paperclip if you need to

  5. Click Send Email

There's no Subject field on a reply. Reply All is greyed out when the thread has only one other person on it.

Note: Currently, there's no Forward. To pass an email on, reply and add the person under CC, or forward it from your mailbox.


7. Pull In Older Emails

Use this when you've just connected your mailbox or added a client, and you want earlier emails to appear.

  1. Click Fetch Previous Emails

  2. Choose a Fetch Condition: Today (the default), Yesterday, 1 Week Ago, 1 Month Ago or Custom Date Range

  3. For Custom Date Range, pick the start and end dates in the Custom Date Range field

  4. Click Fetch Emails

You see "Previous emails are being fetched. This may take a few minutes to complete." The fetch runs in the background and only adds emails to or from this lead or project's client email, not your whole mailbox.

Note: Nothing tells you when the fetch has finished, and the window can stay open after you click Fetch Emails. Close it, wait a few minutes, then reload Emails to check.


8. Use the Email Activity Widget on Home

Add Email Activity to your Home page to see recent emails across your jobs. On Home, click + New Widget and find Email Activity under DOCUMENTS.

Each card shows a short preview, the time and a Reply button that opens a reply right on the card. Click View All to open a panel listing each email with its subject and date.

Note: Currently, Go to Email Activity at the bottom of that panel opens Messages, not Emails. To read a project's emails, open the project's Emails instead.

Note: Currently, Email Activity can show your own name as the sender on every email. Click Reply and check the Reply To address to see who it came from.


⭐ Best Practices

  • Use your client's real email address on the client record -- Emails matches on that address, so a placeholder or your own address fills the project with unrelated mail.

  • Give each client their own address -- if two jobs share one client email, both show the same threads and it's harder to tell them apart.

  • Send client emails from the project -- typing the client's exact address in To keeps your sent email in the project's thread list.

  • Put the job in the subject line -- when a client has several jobs with you, a subject like "Smith Kitchen Remodel - tile selection" makes threads easy to sort.

  • Fetch earlier emails after you connect -- run Fetch Previous Emails once so the history from before the connection shows on the job.

  • Mark threads unread when they need action -- it keeps them bold until someone deals with them.

  • Draft long emails before you open the composer -- Cancel discards your text without asking.


ā“ Common Questions

Q: Can each person on my team connect their own email?

A: Not today. Structur connects one mailbox for your whole company, and everyone who can open Emails on a project sees threads from that mailbox. If several people need to send, connect a shared inbox, such as an office address, and send from it through Structur.


Q: Why is a project showing emails that have nothing to do with the client?

A: The client's email (on Overview, Edit, then Update details under Client) is probably your own address or the connected mailbox's address. Emails shows every message with the client's address on it, so in that case it shows the whole mailbox. Change the client's email to their real address.


Q: Why don't I see any emails on my project?

A: Check three things. Your company mailbox shows Connected in Settings > Integrations. A client is selected in Project Details on Overview with the right email address. And the emails were sent or received with that exact address. For older emails, run Fetch Previous Emails.


Q: My client has two projects with us. Can I separate their emails by project?

A: Currently, no. Emails matches on the client's email address, so both projects show the same threads. There's no separate email address for each project, despite the "Reply, forward or CC emails to your project address" line in Settings > Integrations. Use a clear subject line for each job so you can tell the threads apart.


Q: Do I need a connected mailbox to send proposals or change orders?

A: No. Proposals, change orders and other documents you send from Structur are emailed by Structur from [email protected], not through your mailbox. Emails is only for your own conversations with the client.


Q: Who can see and send emails?

A: Anyone with access to the lead or project and to Emails in Settings > Permissions. Connecting the mailbox needs Full Access to Integrations.


Q: Can I search, delete or file emails into folders?

A: Currently, no. Emails has one list per lead or project with no search, folders or delete. Archive hides a thread from Structur only, and it can't be brought back in Structur. To find an older email quickly, search your mailbox directly.


āš ļø Common Mistakes to Avoid

āŒ Don't

āœ… Do

Use your own or the company mailbox address as a client's email

Enter the client's real email on the client record

Expect each teammate's inbox to show up

Connect one shared company mailbox everyone can use

Type a different address for the client in To

Use the exact email on the client record so the thread lands on the project

Click Cancel on a half-written email

Finish and send, or copy your text first

Look in Emails for proposals you sent from Structur

Check the proposal itself for its send status

Wait for an older email to appear on its own

Run Fetch Previous Emails for that period, then reload after a few minutes

Archive a thread to tidy the list

Leave it, because an archived thread can't be brought back in Structur

Did this answer your question?